Capture Image with meta data from IMX566 on TX2 NX

[bernhard.muellner]

Just stumbeld upon this entry:

IMX565 driver - can not figure out the correct DT height!

Here is the 3004 height - seems same as 3005 with tag:CHANSEL_FAULT_FE: Error at 4128x3004+4 kworker/3:1-105 [003] .... 51.789722: rtos_queue_send_from_isr_failed: tstamp:2010071550 queue:0x0b4b0e58 kworker/3:1-105 [003] .... 51.789723: rtos_queue_send_from_isr_failed: tstamp:2010071651 queue:0x0b4b1c18 kworker/3:1-105 [003] .... 51.789724: rtos_queue_send_failed: tstamp:2010072530 queue:0x0b4a7258 kworker/3:1-105 [003] .... 51.789726: rtos_queue_peek_fr…

I configured the embedded data lines wrong. Only Embedded data with CSI-2 Header 0x12 is counted. Therefore, I had to change it from 4 to 1.

Thank you for your help!