Checking if the SSD is connected correctly

Autonomous Vehicles DRIVE AGX Xavier DRIVE AGX Xavier General
1

Hardware Platform: DRIVE AGX Pegasus™ Developer Kit
Software Version: DRIVE Software 10
Host Machine Version: Ubuntu 18.04
SDK Manager Version: 1.1.0.6343

Hello,

our goal is to record sensor data for further development. Therefore, we bought the Samsung 850 EVO SSD and the eSATA/USB-powered cable as recommended in Connecting HDD through eSATA Port (more specifically, we bought this cable: https://www.amazon.co.uk/Akasa-AK-CBSA03-80BK-Flexstor-eSATA-Cable/dp/B005GNP72M).

We connected the eSATA cable to the eSATA-port 0 on the DRIVE AGX and the USB cable to USB3-XA-2 port. We also formated the SSD to ext4. How can we now check if the SSD drive is connected corretly? Is there any command to check this? It seems, that the DRIVE AGX has not recognized the SSD yet.

We checked other posts in the forum like The SSD is not recognized, please tell me how to recognize it and How to connect SSD(U.2) and DRIVE AGX, but we were not able to find a suitable solution.

We would appreciate any help!

Thanks in advance!

2

Hello,

we are still struggling with connecting the SSD and checking if it was connected properly. We would be very grateful if you could help us with our issue described above.

Thanks in advance!

3

Dear @kn10,
Could you check this thread if it helps.