Please provide the following info (tick the boxes after creating this topic): Software Version [*] DRIVE OS 6.0.6 DRIVE OS 6.0.5 DRIVE OS 6.0.4 (rev. 1) DRIVE OS 6.0.4 SDK other Target Operating System [*] Linux QNX other Hardware Platform DRIVE AGX Orin Developer Kit (940-63710-0…

Dear @sankal.pattanashetti , Note that this forum is intended to support issues related to P3710. For issues with P3663, please contact your NVIDIA representative for correct support channel. Besides that, I could run DW camera sample in headless mode with below steps on P3710 On terminal 1 sudo…

Please provide the complete reproducing steps after flashing DRIVE OS.

I followed some of these steps to set up and access board through SSH. https://developer.nvidia.com/docs/drive/drive-os/latest/linux/sdk/common/topics/board/Setup_and_Configurations.html After this I run some samples in host and target system following this link samples . I am accessing GUI through …

Dear @sankal.pattanashetti , Are you accessing VNC via headless or non-headless mode? Could you share the steps? Do you see blank screen when connected to target on VNC terminal?

I am accessing VNC via headless.I followed headless and Desktop FS section in this link . I am getting full GUI.

After few days of working with VNC terminal, it got automatically disconnected. Now I am getting blank purple screen.How to solve this issue.

It seems that you were able to run the DW camera sample application through VNC, but the current issue is that VNC disconnected after a few days. If my understanding is correct, I suggest creating a separate topic specifically for the VNC issue. This will help ensure that the two issues are discusse…

Now it’s working as previous session was present in temp so deleted it.

It appears that the issue has been resolved by deleting the previous session stored in the temporary files. If everything is working fine now, then it indicates that the problem has been successfully addressed. Please confirm if there are any further concerns or if there’s anything else I can assist…

Dear @VickNV thanks for the reply.The display error got solved.Camera samples were my primary problem.How can I test camera samples provided in /usr/local/driveworks/bin or through nvmedia samples.Is this can be done through terminal ?

You can run the camera apps through the terminal if a monitor is physically connected to the system or if rendering is disabled.

Error while running camera samples

Autonomous Vehicles DRIVE AGX Orin DRIVE AGX Orin General

VickNV July 26, 2023, 12:11am 16

Are you still using P3663 as in Download drive OS 6.0.0?

Topic		Replies	Views
Unable to use ./sample_camera for Entron F008A120RM0AV2 on Drive AGX Orin OS DRIVE AGX Orin General driveos-nvmedia	9	261	August 12, 2024
Display is not working after flashing DRIVE AGX Orin General drive-platform-bootup	18	1339	July 20, 2023
Unable to run sample_camera example provided by NVIDIA DRIVE AGX Orin General driveos-nvmedia	1	506	September 18, 2023
Driveworks 5.14 issue with DRIVE AGX Orin DRIVE AGX Orin General driveworks	6	641	February 8, 2024
[BUG] target-docker-container running driveworks sample_camera failed DRIVE AGX Orin General docker	13	1764	August 14, 2024
Issue with setting VNC on Drive OS DRIVE AGX Orin General drive-platform-configuration	10	958	November 29, 2023
New to NVIDIA Drive OS, Hands on, Next steps DRIVE AGX Xavier General driveos , drive-graphics	8	1964	July 14, 2020
No Display out with Session never registered, failing error DRIVE AGX Orin General drive-platform-setup	10	8670	February 27, 2023
Getting error while executing Driveworks samples DRIVE AGX Xavier General driveworks-dnn-framework	5	996	May 1, 2023
DriveWorks RenderEngine unable to render sample_camera_replay but can render different samples DRIVE AGX Orin General driveworks-cameras	8	1064	March 2, 2023

Error while running camera samples

Related topics