Flash fails on Jetson Orin Nano

Robotics & Edge Computing Jetson Systems Jetson Orin Nano
,
1

Using SDKManager with brand new Orin Nano. It does boot into recovery mode when jumpered, and it is recognized by the software, and all the downloads are successful. But failed to complete the installation. Earlier while it was not booting I tried with MicroSD card and found similar problem and now came back to NVME SSD again. Please find the log and screenshot. Any help would be highly appreciated.

image
image1229×695 170 KB

SDKM_logs_JetPack_6.2_Linux_for_Jetson_Orin_Nano_[8GB_developer_kit_version]_2025-03-02_16-45-38.zip (330.2 KB)

Thank you!

3

Hi,
Some questions to confirm

  • Is your Orin nano a dev kit or custom board?
    • You could provide the link you bought for us to review
  • Is your host a native ubuntu or a virtual machine (e.g. VMware…)

Thanks

4

My Orin nano is a dev kit
Purchase link: Amazon.com: NVIDIA Jetson Orin Nano Super Developer Kit : Electronics
My host is a native ubuntu

5

Hi There,
Please let me know if you find anything abnormal from the log file that I shared.

Thank you!

6

Based on your log

 Check your network settings (firewall, VPN,...)

Please disable the firewall

Thanks