How to start nano through nvme disk.

[sangshiqiangssq]

I bought a JN30 backplane for the nano.

JN30_1.2.pdf

It can be recognized after installing Samsung’s nvme. Read and write speeds are above 1Gb/s.

But I don’t know how to boot from nvme, or let the root directory of the system run on the nvme disk.

I modified extlinux.conf, but it seems that the kernel did not load the nvme driver when the system was started, so it failed.

Does any friend know how to operate?

[WayneWWW]

Sorry that currently nvme boot is not supported. I will let other forum user to share if they have such methods.