Hi, I cannot run a simple command to run IMX219 camera module on my Jetson Nano. when entering command " ls /dev/video0" , It returns : “/dev/video0” - camera module is detected by the system. When i try to run : “gst-launch-1.0 nvarguscamerasrc ! ‘video/x-raw(memory:NVMM),width=3820, height=2…

[image] chenrimoch: [ 10.729955] wlan0: associated [ 10.747739] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.958039] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 8c:59:c3:ab:18:58 [ 26.363700] tegradc tegradc.0: blank - powerdown Seems it took a long time b…

IMX219-160 8MP module - gst-launch-1.0 "transparent" screen

Autonomous Machines Jetson & Embedded Systems Jetson Nano

Honey_Patouceul October 9, 2020, 5:17pm 5

Do you have a NVME wifi card ? You may have a look to this post.

1 Like