I made a large box emitter and let some Marbles ran over it. But how could I have some interaction with the smoke and marbles? You know if marble is rolling over the smoke emitter, there should be an empty trail behind the marble for a few seconds - until the smoke start to rise again… This …

Towards the end of the video, you scroll down to where it shows the collision approximation as Triangle Mesh. You have to switch this to convex hull or convex decomposition to work in this case. Even then, plane like that might end up making very thin convexes. So if that doesn’t work, do try a thi…

Hi @pekka.varis ! I’ve pointed the dev team to your post. Here is some documentation that may help: Fluid Dynamics — Omniverse Extensions documentation

See the Collision section in the documentation Wendy linked. Collision support is limited today. It requires recycling of emitters with special configuration. For a bunch of instances of spheres like this, should be feasible though using sphere emitters. My recollection was this was done for the ori…

hello! Any news about this collision with flow ? I would need to set some basic collisions to this steam coming out, like the roof for example: [image] If I import steam preset to other usd, it will not play USD Composer (Create) Please see the video here: H…

On FlowSimulate, there is now a ‘Physics Collision Enabled’ option. This will bring PhysX convex hulls into Flow. This can save a lot of time over doing manual collision setup, but do note today performance overhead can become significant for scenes with many PhysX colliders.

@areidmeyer thank you! Please see the video where I try to activate this: What am I missing?

Excellent!! This works so good, thank you.

@areidmeyer you could also maybe help me to take this further: [image] Force fields and Flow steam? USD Composer (Create) Hello sim gurus! I just learned how to use steam and colliders: Now try to combine Force fields and Flow steam. I opened the demo scene: Cloth De…

Interaction of Smoke and geometry objects

Omniverse Archive Samples & Examples

pekka.varis November 17, 2022, 9:52am 9

@areidmeyer you could also maybe help me to take this further:

Topic		Replies	Views
Disable interaction between two flow emitters Samples & Examples	0	299	May 22, 2023
The collision doesn’t work well Samples & Examples physics	30	2378	December 14, 2022
Disable interaction between two flow emitters General Discussion openflow	1	473	May 24, 2023
Force fields and Flow steam? Samples & Examples	0	383	November 17, 2022
My steam flow is not running when imported to other empty scene Samples & Examples	9	523	December 15, 2022
Blast Flow tutorial Samples & Examples	3	614	June 13, 2022
Point Cloud data physics setup Samples & Examples	2	509	June 22, 2022
How to simulate smoke in Flow under the influence of a forcefield wind Extensions core	4	210	August 30, 2024
Creating custom meshes in issac sim General Discussion	6	1472	February 10, 2023
Point Cloud data physics setup Isaac Sim	3	1614	July 6, 2022

Interaction of Smoke and geometry objects

Related topics