Jetson Orin Development Kit

Robotics & Edge Computing Jetson Systems Jetson Orin Nano
1

Hello all,

I am creating own custom carrier board by taking referenece P3737. I have some doubts regarding customization to related topics i have specified below.

  1. I was thinking to power the SOM by only DC jack and not by USB type C PD in short i want to remove USB Type C port will this have any effect ?

  2. Nvidia says that debug MCU chip (U136 Model: ATSAMD21G16BOAU) is for their internal use and should not be copied for custom boards so if I remove that MCU will this have any effect on fucntion of SOM.

  3. ID EEPROM (U501) Nvidia says this is also for their internal use and should not be copied for custom boards removing this will have any effect on fucntion of SOM or not ?

3
  1. Powering just through DC jack expected to work. Please refer to Jetson AGX orin Developer Carrier Board Specification
    image
    image1629×974 35.6 KB

2 and 3. Please refer to Jetson AGX Orin Series Modules Design Guide

image
image1692×1019 71.9 KB