Jetson Orin Nano 8GB Developer Kit fails to display anything and fails to flash

Robotics & Edge Computing Jetson Systems Jetson Orin Nano
,
1

We’re are trying to get one of our Jetson Orin Nano’s to boot but when we give it power the fan just turns on and off and nothing displays. We also tried to flash this nano’s nvme and sd card which both are known to work and it also gives us an error. Logs given by sdkmanager provided:
SDKM_logs_JetPack_6.0_(rev._2)_Linux_for_Jetson_Orin_Nano_modules_2024-09-10_10-25-33.zip (425.5 KB)

I have flashed another nano successfully using the same usb c cable and our other nanos work fine using the power cable we tried using for this nano so neither of those are the problem.

Thank you,
Maxim

2

Hello @maximDolgov,

That sounds very strange, could even be a HW issue.

Have you tried checking the UART output while flashing the board?
Sometimes you are able to see more information there than on the regular logs that the SDK manager of flash script gives.

regards,
Andrew
Embedded Software Developer at ProventusNova

4

Could you cross check the module on a working board ?

5

Ok I have cross checked the module and I have confirmed that it is a issue with the module and not the board

6

Then please try to do the RMA: Jetson FAQ | NVIDIA Developer