Jetson Orin NX ,DP MST display output:,syslogo :NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Robotics & Edge Computing Jetson Systems Jetson Orin NX
,
1

DP MST双显配置后，系统syslog出现下面异常信息，比较有规律，频繁出现，约1小时1次，检查发现，对应的显示会闪屏一下，能否帮确认系统出现这类错误，会导致显示闪屏吗？

间断性跟踪：

Aug 13 14:15:55 ubuntu kernel: [ 3583.312283] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 13 15:15:55 ubuntu kernel: [ 7183.181184] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

老化一个晚上跟踪：

Aug 13 17:01:10 ubuntu kernel: [ 3583.811174] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 13 18:01:10 ubuntu kernel: [ 7183.686398] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 13 19:01:10 ubuntu kernel: [10783.545557] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 13 20:01:09 ubuntu kernel: [14383.421462] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 13 21:01:09 ubuntu kernel: [17983.295262] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 13 22:01:09 ubuntu kernel: [21583.215646] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 13 23:01:09 ubuntu kernel: [25183.089193] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 00:01:09 ubuntu kernel: [28782.978471] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 01:01:09 ubuntu kernel: [32382.834758] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 02:01:09 ubuntu kernel: [35982.724150] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 03:01:09 ubuntu kernel: [39582.611494] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 04:01:09 ubuntu kernel: [43182.500239] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 05:01:08 ubuntu kernel: [46782.373899] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 06:01:08 ubuntu kernel: [50382.229469] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 07:01:08 ubuntu kernel: [53982.102392] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

Aug 14 08:01:08 ubuntu kernel: [57582.022272] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:

5

Is this tested on devkit or custom board?

Which jetpack release is that?

10

Custom board;

R36.3.0;

11

Please move to r36.4.3.