MIPI driver probing

[ShaneCCC]

The what interface to communicate with your device for streaming?
If your device able to stream automatically then you can reference to below topic to driver implement.

Jetson Xavier NX MIPI CSI-2 without I2C from TC358768

I am trying to capture the preconfigured 8bit grayscale CSI data from an TC358768 without I2C communication on Xavier NX board with Jetpack 32.4.4.CSI’s driver is in accordance with Jetson Xavier NX MIPI CSI-2 without I2C from FPGA FPGA sets the register of TC358768 through the I2C bus, and can capture the CSI signal from the oscilloscope. then use ./v4l2-ctl -d /dev/video0 --set-fmt-video=width=1920,height=1080,pixelformat=GRAY --set-ctrl bypass_mode=0 --stream-mmap --stream-count=1 and set…