Nano keeping restar,can't into recovery mode to flash

[5ukyn]

any suggestion?
Nano-log.txt (22.3 KB)

[kayccc]

Please refer to Debug tips when you hit any issue (fail to boot/ keep reboot …etc) - Jetson & Embedded Systems / Jetson Nano - NVIDIA Developer Forums to see if can help. Thanks

[5ukyn]

nano module + xavier-NX developkit,SDKmanager show flash sccessful, still can’t into desktop.

Xavier-NXdevkit+Nano-module-uartlog.txt (43.7 KB)

[WayneWWW]

There is no support for Nano module + Xavier NX carrier board…

[5ukyn]

I’m testing with the Nano dev kit，same phenomenon。Nano devkit(SDcard) can power on，but the Nano module(900-13448-0020-000)still auto restar。
power ： DC 5V4A
nano-devkit-log.txt (21.2 KB)
nano-module-log.txt (22 KB)

[WayneWWW]

請問你在使用的是Jetson Nano 2GB還是4GB?

[5ukyn]

4GB

[WayneWWW]

請你確認一下加上PCN overlay之後有沒有用

Jetson Linux R32.7.5

Overlay_PCN211181_r32.7.5.tbz2

[5ukyn]

感谢你，现在解决了。
重新下了这个包，然后打补丁后是可以正常开机了。
我有一个疑问这份PCN变更针对JP4.6.5，那一开始我通过SDKmanager烧录JP4.6.6为啥有问题呢？

[WayneWWW]

沒有. 目前沒有任何一份Jetpack release有包含這個PCN.