No Monitor Display when upgrade from DriveOS 5.1.x to DriveOS 5.2.6.0

Autonomous Vehicles DRIVE AGX Xavier DRIVE AGX Xavier General
1

Please provide the following info (check/uncheck the boxes after creating this topic):
Software Version
DRIVE OS Linux 5.2.6
DRIVE OS Linux 5.2.6 and DriveWorks 4.0
DRIVE OS Linux 5.2.0
DRIVE OS Linux 5.2.0 and DriveWorks 3.5
NVIDIA DRIVE™ Software 10.0 (Linux)
NVIDIA DRIVE™ Software 9.0 (Linux)
other DRIVE OS version
other

Target Operating System
Linux
QNX
other

Hardware Platform
NVIDIA DRIVE™ AGX Xavier DevKit (E3550)
NVIDIA DRIVE™ AGX Pegasus DevKit (E3550)
other

SDK Manager Version
1.9.1.10844
other (2.1.0)

Host Machine Version
native Ubuntu 18.04
other (Ubuntu 22.04.4 LTS)

I have recently upgraded/flashed using the NVIDIA SDK Manager Docker image for Ubuntu 18.04 an NVIDIA Drive AGX Xavier from NVIDIA Drive OS 5.1.x to Drive OS 5.2.6, flashing both the Tegra A and Tegra B (A+B). When finalizing the install using the USB Debug connection, in the step of activating the GUI as specified at the following link, no video signal received by monitor.
NVIDIA DRIVE OS 5.2 Linux SDK Developer Guide : System Software Components and Interfaces | NVIDIA Docs

nVidia Ticket
nVidia Ticket947×476 29 KB

As you see in the below screenshot the gdm3 service works for 1.5s but the process was killed.

Screenshot from 2024-08-01 14-33-08
Screenshot from 2024-08-01 14-33-08512×800 14.6 KB

Workaround:
1.lightdm tried - signal received but black screen
2.Forum topic No Monitor Display for DriveOS 5.2.6.0 - DRIVE AGX Xavier / DRIVE AGX Xavier General - NVIDIA Developer Forums - no video signal.

3

Dear @laurentiu.pienariu,
Did you check re-installing gdm3?

4

yes, still not working

5

Dear @laurentiu.pienariu,
Could you check the discussion at Error trying to connect monitor - #17 by SivaRamaKrishnaNV and Display manager gets destroyed after reboot - #10 by anil-kumar.chavali if it helps.