Not able to flash jetpack3.2.1 on tx2.

Dear team,
My jetson tx2 was running good with jetpack3.2.1. All of a sudden yesterday it was not booting. I tried alot at the end thought to flash jetpack3.2.1 again. So now i am flashing again and it gets stuck somewhere around -

2.6314 ] Assuming zero filled SBK key
[ 2.6455 ]
[ 2.6476 ] tegrahost_v2 --updatesigheader blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.hash zerosbk
[ 2.6492 ]
[ 2.6512 ] tegrahost_v2 --generateblob blob.xml blob.bin
[ 2.6523 ] number of images in blob are 9
[ 2.6528 ] blobsize is 3749384
[ 2.6532 ] Added binary blob_nvtboot_recovery_cpu_sigheader.bin.encrypt of size 190048
[ 2.6573 ] Added binary blob_nvtboot_recovery_sigheader.bin.encrypt of size 79600
[ 2.6599 ] Added binary blob_preboot_d15_prod_cr_sigheader.bin.encrypt of size 63024
[ 2.6629 ] Added binary blob_mce_mts_d15_prod_cr_sigheader.bin.encrypt of size 2076832
[ 2.6662 ] Added binary blob_bpmp_sigheader.bin.encrypt of size 529440
[ 2.6679 ] Added binary blob_tegra186-a02-bpmp-quill-p3310-1000-c04-00-te770d-ucm2_sigheader.dtb.encrypt of size 466160
[ 2.6696 ] Added binary blob_tos_sigheader.img.encrypt of size 62976
[ 2.6697 ] Added binary blob_eks_sigheader.img.encrypt of size 1488
[ 2.6697 ] Added binary blob_tegra186-quill-p3310-1000-c03-00-base_sigheader.dtb.encrypt of size 279664
[ 2.6697 ]
[ 2.6698 ] Sending bootloader and pre-requisite binaries
[ 2.6713 ] tegrarcm_v2 --download blob blob.bin
[ 2.6720 ] Applet version 01.00.0000
[ 2.6787 ] Sending blob
[ 2.6795 ] [… ] 027%^M[ 2.6795 ] [… ] 055%^M[ 2.6795 ] [… ] 083%^M[ 2.$
[ 3.1357 ]
[ 3.1377 ] tegrarcm_v2 --boot recovery
[ 3.1393 ] Applet version 01.00.0000
[ 3.1455 ]
[ 3.1469 ] tegrarcm_v2 --isapplet
[ 4.8591 ]
[ 4.8815 ] tegradevflash_v2 --iscpubl
[ 4.8832 ] CP

There is no error for which i can search for. Please help.
Thanks.
flash_os_tx2.log (180 KB)

Note: I am using Ubuntu16.04 on host not VM. Also is it recommended to connect HDMI and external keyboard/mouse?

Flash looked normal up until the point it just stopped. Keyboard/HDMI is not needed for flash. If you flash again, does it stop at this exact same spot?

Hi,
Yes this is the same point where it always stops. I have tried a lot with new jetpack3.3 also.

Stopping at this same exact spot each time, and seeing that it should otherwise work, suggests there is hardware failure. If you want to RMA, then search for “RMA” for instructions near the top of this:
https://devtalk.nvidia.com/default/topic/793798/embedded-systems/some-jetson-web-links/

Hi,
Thanks for the support. I will follow the link.