Hi aesinfo,
The VM versions of Linux are not we supported when running the SDK manager, however some users can try to get it flash with devices successfully, you may refer to below topics if can help:
Hi,
I’m trying to flash Jetson TX2 using JetPack 3.3. Ethernet cable connected to the host PC through USB adapter. The system is Ubuntu 16.04 running on VirtualBox on Windows host machine. Start by ./JetPack-L4T-3.3-linux-x64_b39.run. I have done everything according to the giving instructions but got the error:
[ 5.2025 ] tegrarcm_v2 --boot recovery
[ 5.2072 ] Applet version 01.00.0000
[ 5.2518 ]
[ 5.2553 ] tegrarcm_v2 --isapplet
[ 5.9173 ]
[ 5.9448 ] tegradevflash_v2 --iscpubl
[ 5.9478…
I am trying to flash a production Jetson Nano using sdkmanager running under Ubuntu 18.04. When I attempt to flash the device (manual mode) I get a notification that the sdkmanager is not able to connect to the device (see attached screenshot). Furthermore, the device does not show up using lsusb ("0955:7f21 (NVIDEA Corp.) per instructions on the warning screen. My thoughts are the USB port is not detecting the Nano under the VM - and/or the USB connection is simply not able to operate the Na…
My flash failed after getting to 99.8%. It became very slow as it got above 90%. 99.7 - 99.8 took about 30 minutes. The logs indicate:
…
17:54:47 INFO : Flash Jetson TX2 : [ 4088.3116 ] tegradevflash_v2 --iscpubl
17:54:48 INFO : Flash Jetson TX2 : [ 4088.3143 ] CPU Bootloader is not running on device.
17:54:48 INFO : Flash Jetson TX2 : [ 4088.3336 ]
17:54:48 INFO : Flash Jetson TX2 : [ 4089.3393 ] tegrarcm_v2 --isapplet
17:54:48 INFO : Flash Jetson TX2 : [ 4089.3623 ]
17:54:48 INFO : Flas…