Pcie lane reversal on C5

Hi Sir,

Question about pcie lane reversal - Jetson & Embedded Systems / Jetson AGX Xavier - NVIDIA Developer Forums

The pcie has automatically support lane reversal on xavier past post.

Our AGX Orin carrier board have one M.2Key M pcie x4 [lane3~0] with B+M PCIEx2 SSD [lane3-2] on pcie lane reversal mode. The SSD should work properly.

If we want to design the new one AGX Orin carrier board, but its M.2Key M pcie x4 [lane0~3] is not use pcie lane reversal. And use B+M PCIEx2 SSD [lane0-1].

Could we use the same Orin module directly support two carrier board?
If provide a GPIO to identify carrier board, could the lane reversal be control?

Thanks!

There is no update from you for a period, assuming this is not an issue any more.
Hence we are closing this topic. If need further support, please open a new one.
Thanks

Could you directly share the pin # of what you want to use here? It is not quite clear to know what lane3~0 or lane3-2 you are talking about.