Ping is not working between Drive Orin and another ubuntu System

Please provide the following info (tick the boxes after creating this topic):
Software Version
DRIVE OS 6.0.8.1
DRIVE OS 6.0.6
DRIVE OS 6.0.5
DRIVE OS 6.0.4 (rev. 1)
DRIVE OS 6.0.4 SDK
other

Target Operating System
Linux
QNX
other

Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-300)
DRIVE AGX Orin Developer Kit (940-63710-0010-200)
DRIVE AGX Orin Developer Kit (940-63710-0010-100)
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
DRIVE AGX Orin Developer Kit (not sure its number)
other

SDK Manager Version
1.9.3.10904
other

Host Machine Version
native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other

I am trying to establish connection between Drive Orin and another Ubuntu System. Both the system are connected via ethernet cable. I am assigning IP in the same range, but still i am unable to ping Drive Orin from ubuntu system or vice versa. Requesting support in this regard.

But when i am connecting Drive Orin and another system through router, and ethernet cable, then i am able to ping

Wasn’t your issue previously resolved in Unable to configure Static IP on Drive Orin?

Yeah, it did work, but now its working on only 1 RJ45 port mgbe1_0 and its not working on eqos_0

Dear @arpit.agarkar,
Does that mean static IP configuration on eqos is not working?
Please confirm if the eqos interface is working a newly flashed system? If not, please see if the discussion in AGX DRIVE ORIN - Network Manager needs to be running helps ?

eqos is working, but setting it Static IP is not working

There is no update from you for a period, assuming this is not an issue any more.
Hence we are closing this topic. If need further support, please open a new one.
Thanks

Dear @arpit.agarkar,
So in topic Unable to configure Static IP on Drive Orin you are able to set static IP to mgbe1_0? I see the topic is related to status IP setting of eqos.

When you connect both devkit via router and set static IP on both devkits in your network range, are you able to ping each other?

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.