SPI2 as GPIO?

Autonomous Machines Jetson & Embedded Systems Jetson TX1
1

Hi Nvidia,

I would like to use SPI2 as GPIO with the following balls:

G15 (MOSI)
H15 (MISO)
H14 (SCK)
G16 (CS0)

Sadly I didn’t check the pinmux sheet when I assigned these as GPIO in my addon board so I’m simply asking if there’s a way to make these pins function as GPIO or if i need to revise my PCB and forgo these pins as GPIO.

Thanks
Lasse

2

Hi, they can’t be set as GPIOs per pinmux sheet and so no way for that.