So my gstreamer app will fail to set status to NULL and clean up correctly so we are systemctl restart nvargus-daemon before we are killing the gstreamer app. Testing I find that my gstreamer app does not start 100% of the time, I also find the nvargus-daemon does not restart 100% of the time. I g…

hello terrysu50z, [image] terrysu50z: do not understand your question about sensor stream stability it’s my assumption that your camera workable in some scenario, please correct me if that’s wrong. FYI, VI engine expect camera stream comes continuously without failures. according to the lo…

I concur with Terry. I have seen the same issues with Gstreamer and nvargus-daemon not restarting properly. I have seen the problem on R32.4.3 and on the latest R32.5.0. So it is not isolated to older versions of L4T nvargus-daemon. Here is what I have logged/captured on L4T R32.5.0 (JP 4.5)… With…

Here is link to the previous topic that I started on this issue: [image] Crashing camera stream brings down entire video pipeline Jetson TX2 First, in my system I am frequently testing with multiple cameras (up to six simultaneously). Sometimes while I am testing over a lo…

which gzip file contains nvarguscamerasrc? my tx2-4g does not have enough disk space to build the complete public_source! Will this work with R32.3.1? Why recompile, why is this not a parameter to control it from the command line? Thanks, Terry

Found gst-nvarguscamera and it needs jetson_multimedia_api, and I know that will not fit on my tx2-4g, I only have 4G remaining, Really need help, g++ -c gstnvarguscamerasrc.cpp -fPIC pkg-config --cflags gstreamer-1.0 gstreamer-base-1.0 gstreamer-video-1.0 gstreamer-allocators-1.0 glib-2.0 -I./ -…

Found jetson_multimedia_api but make fails. Need help Terry make g++ -c gstnvarguscamerasrc.cpp -fPIC pkg-config --cflags gstreamer-1.0 gstreamer-base-1.0 gstreamer-video-1.0 gstreamer-allocators-1.0 glib-2.0 -I./ -I…/ -I/usr/src/jetson_multimedia_api/include/ -I/usr/src/jetson_multimedia_api/ar…

This problem is also affecting my product using L4T R32.5.0. There needs to be a way for nvargus-daemon to restart properly in order to have a viable consumer product. Similar to JDSchroeder, with multiple cameras streaming, nvargus-daemon will lock-up and not cleanup properly. Please help to solv…

The timeout solution might help in my case, but in typical Nvidia fashion, the solution is terse, and we the users need cookbook type solutions. I downloaded the public_sources they pointed at, had to search for the gzip file that contained the nvarguscamerasrc source, and then downloaded it to my …

Hi, Please share information about your camera modules. If it is from our camera partners, we can work with partners to do further investigation.

Tx2-4g R32.3.1 nvargus-daemon does not restart 100% of the time

Robotics & Edge Computing Jetson Systems Jetson TX2

DaneLLL April 15, 2021, 2:02am 5

Hi,
On JP4.5, please extend timeout value to 5(or 10) seconds in nvarguscamerasrc plugin, and give it a try. Please refer to
JetPack4.5 using gst to open raw camera "nvarguscamerasrc0 reported: TIMEOUT " - #7 by DaneLLL

Topic		Replies	Views
R32.3.1.tx2-4g gstream app fails to run nvargus_daemon message Jetson TX2 camera	28	2260	May 13, 2021
Nvargus-daemon locks up video pipeline on errors while using multiple cameras Jetson TX2 camera , nvbugs	7	4015	May 4, 2021
Nvargus-daemon: Too many pending events error? Jetson Nano camera	16	411	May 30, 2025
Nvargus-daemon errors when using nvarguscamerasrc at boot Jetson AGX Xavier camera	1	824	December 22, 2021
Gstreamer command repeatly failed after hours Jetson Orin Nano camera	12	363	December 18, 2024
BUG: nvarguscamerasrc Segmentation fault Jetson Nano	14	3527	April 14, 2021
R32.3.1 tx2-4g gstreamer app fails to start Jetson TX2 gstreamer	14	1643	November 25, 2020
JP5.1 nvarguscamera doesn't recover from single NVCSI failure Jetson AGX Xavier camera , nvbugs	50	5653	June 15, 2023
[32.3.1] gstreamer pipeline error and cmda_handle_timeout with OV5693 Jetson TX2 camera	21	2336	May 28, 2021
How to restart nvargus-daemon? sudo systemctl restart nvargus-daemon.service won't work Jetson Nano camera	3	4135	March 1, 2023

Tx2-4g R32.3.1 nvargus-daemon does not restart 100% of the time

Related topics