TX2/J90 board and CAN BUS

[mauricio65nif]

Hi!

I need more information about how to connect the J90 board to a CAN network:

1. It is really necessary to connect 5V and GND pins from the J9 connector, or CAN_H and CAN_L are enough?

2. The pins on J9 CAN connector from TOP view are, in order: GND, CAN_L, CAN_H and 5V? It is not clear (see the pics).

• Board top: https://i.imgur.com/tJXewiR.png
• Board bottom: https://i.imgur.com/ik5nSFc.png
• Datasheet reference: https://i.imgur.com/hwOXvbN.png

Thanks!
Mauricio de O. Pena

[Trumany]

Hi, please contact with vendor for detail. For Jetson, J26 is for CAN ports.