I was trying to setup the dual booting on my Vivobook15Pro with Geforce 3050 Laptap GPU. Initially I have open-source driver from Xorg, and I switch to nvidia-driver-515 through “Sorftware and Updates” Then my laptop failed to be booted. It wil stucked at balck screen with my text cursor blinking. I follow the advices from the below links, but none of them solved my problems. This morning I reinstall ubuntu, this time with Wifi so it install the nvidia-driver-515 automatically, so I don’t have to switch manually. I tried to reboot a couple of times, it works, but after I install Anydesk, Chrome, VScode (just some common pkgs), it failed to boot again. I try to follow the instruction, start my X, but it failed. “If the machine can not be logged into remotely, please run the bug report script with X running.” So I log from a remote terminal with startx -- -logverbose 6, but my X cannot be started from remote, too. So I log without it started. Thank you for your time and consideration. nvidia-bug-report.log.gz (284.9 KB)

Now the i915 driver loads too late, please also add it to the initrd by adding the line i915 to /etc/initramfs-tools/modules and running sudo update-initramfs -u

My xserver log. Xorg.0.log (9.0 KB)

The advice links I followed, I also have set nomodeset in the grub. [image] Booting with black screen after install nvidia-driver on ubuntu20.04 Linux I am trying to install nvidia-driver (470) on my Ubuntu on my laptop. After a lot of failed attempts to install drivers properly. Unfortunately, every solution I found doesn’t help. Even with the secure boot disabled I still got a black screen like this : [image] The interesting part is: nvidia-smi actually shows some output and driver seems to be running : Mon Dec 20 22:08:12 2021 ±----------------------------------------------------------------------------+ | NVIDIA-SMI 470.57.02 D… Also, I find out I was missing nvidia-dkm-515, but after I installed it, it did not solve the issue.

I have folowed your instructions, I removed nomodeset and sudo update-grub2 I have added the lines: nvidia nvidia-modeset nvidia-drm to /etc/initramfs-tools/modules and run sudo update-initramfs -u it still stuck in blank screen, but this time was able to startx -- -logverbose 6 from tty Here is the newest bug report. Thank you for your advices. nvidia-bug-report.log.gz (317.1 KB)

It worked like a charm. But my speaker now has no sound, while BlueTooth earphone works. I have checked the pavucontrol, the speaker is outputting. I have tried to reinstal pavucontrol and alasa tool. It did not work. Also, I have tried the solution in the link https://www.bobjohnson.com/bloghow-to-install-ubuntu-on-a-panasonic-toughbook-cf31/ I am not sure whether I was allowed to ask this kind of question here. But are there others also run into this problem after the graphics fix? If you need the report, let me know, Thanks for your help.

log.txt (94.1 KB) Thank you for your patience.

It’s a Realtek ALC294 sound chip which seems to be problematic with Linux. Please check if any of these help: https://askubuntu.com/questions/1276428/no-sound-alc294-asus-rog-strix-512-ubuntu-20-04-01 https://bugzilla.kernel.org/show_bug.cgi?id=206589 In general, to get an updated sound driver you might want to upgrade your kernel using the liquorix ppa.

Upgrading the kernel using liquorix ppa did not work for me. My kernel is now Linux 5.19.0-7.1-liquorix-amd64 I have also tried to follow the links: follow the below [Nevil] Sound Not Working on Ubuntu 20.04 Asus Vivobook Pro sound, pulseaudio, asus, realtek answered by Nevil on 06:49AM - 24 Feb 22 UTC to add the following into etc/modprobe.d/alsa-base.conf options snd-hda-intel model=asus-zenbook Also, I tried the script method, but it only works for a couple of minutes and suddenly I am deaf again. https://askubuntu.com/questions/1394452/sound-not-working-on-ubuntu-20-04-asus-vivobook-pro/1394625#1394625 I’ll try to look up other solutions.

From looking around, this seems to be a crappy sound chip. I guess your best shot is attaching to the kernel bugzilla entry, seems some people are putting effort into it and are about to contact realtek devs about it.

Ubnuntu 20.04.5 failed to boot after driver installation on ASUS Vivobook15Pro with Geforce 3050 Laptap GPU

Graphics / Linux Linux

generix September 5, 2022, 11:41am 4

Please remove nomodeset parameter if you have set it, then try this:
https://forums.developer.nvidia.com/t/linux-mint-nvidia-driver-loads-with-startx-but-not-on-initial-startup/168262/2

Topic		Replies	Views
Ubuntu 22.04.1 LTS - GeForce RTX 3050 Ti Mobile Linux kernel	19	6489	October 10, 2022
I cannot boot my ubuntu 20.04 LTS beyond a black screen after installing Nvidia drivers Linux	0	775	July 10, 2021
No matter which drivers I install, I cannot boot my ubuntu 20.04 LTS beyond a black screen Linux	16	13708	November 1, 2020
Ubuntu 20.04 block on startup screen after I installed nvidia drivers Linux	12	6664	June 25, 2021
Ubuntu 20,04 boots to black screen after installing 460 driver for RTX 3070 Linux	1	891	August 2, 2021
Ubuntu 20.04 with 2080 ti Cannot boot(multiple driver tested) Linux	1	620	November 28, 2022
Booting with black screen after install nvidia-driver on ubuntu20.04 Linux	4	4693	December 23, 2021
The Dreaded Black Screen on boot: Ubuntu 22.04 + 2080ti + 515 drivers Linux boot , ubuntu	11	8923	November 17, 2022
Unable to boot after install NVIDIA drivers on Ubuntu 22.04 Linux boot	1	3079	September 28, 2023
Boot related issue on Ubuntu 22.04 when NVIDIA driver is installed Linux	17	8764	April 19, 2024

Ubnuntu 20.04.5 failed to boot after driver installation on ASUS Vivobook15Pro with Geforce 3050 Laptap GPU

Related topics