Unable to properly mount rootfs on my autonomous device using Jetson AGX Orin device and Jetson 35.2.1

[DaveYYY]

Hi,

this is a fail-safe mechanism that cannot be disabled, and may I ask what’s the use case where frequent reboot is required?
Check this post by another user a few days ago:

Orin won't boot after successive reboots

Hello NVIDIA engineers: Orin won’t boot after successive reboots I have a problem with the Jetson agx orin (Jetson R35.2.1): After executing “sudo reboot” three times in a row in the uart terminal, the rootfs fails to boot with the following error log: [2023-07-20 13-17-19屏幕截图] I have to run flash.sh again to burn the rootfs, but the problem is still reproduced after three consecutive “sudo reboots”. what is the reason for this problem and why this mechanism exists? how to disable this m…