Hi, We have a demo ORIN board and the attached ORIN board can be burned by the command “sudo ./flash.sh jetson-agx-orin-devkit mmcblk0p1”. And then we burn a new orin board with the demo bottom board with the same command, it got failed.The error is listed as following. [ 6.1906 ] Assuming zero …

Hi, I retry the dtb which is modified from otg to host, and the module can be brought up successfully. But there is a problem that the DP has no output after the picture of log appeared for a little time.

Please follow the adaptation guide to disable the cvb eeprom read. [image] Jetson AGX Orin Platform Adaptation and Bringup Guide now available! Jetson AGX Orin We have now posted Jetson AGX Orin Platform Adaptation and Bringup Guide on Jetson Linux Page . Here is the dire…

I have modify it as following, but it does’t take action.Does something been lost? ==================================================== EEPROM is an optional component for a customized carrier board. In the case the carrier board is designed without an EEPROM, below modifications will be needed o…

Then please dump the uart log from Orin side when flash error happened.

The log is as following. [0709.416] I> MB1 (version: 0.11.0.0-t234-54845784-7fb1fa27) [0709.422] I> t234-A01-0-Silicon (0x12347) Prod [0709.426] I> Boot-mode : Coldboot [0709.429] I> Emulation: [0709.432] I> Entry timestamp: 0x00000000 [0709.435] I> last_boot_error: 0x0 [0709.439] I> BR-BCT: …

Hi, Is your Orin a 32GB module?

hi~ Wayne, Did you mean the Jetpack 5.0.1?

No, I mean the early access version of the next release.

Hi, I have consulted our technical support，and he let me try the EV2 version. When I burn this version, I got failed and the following is the error message. zhou@zhou-Default-string:~/sdb7/orin/release/Linux_for_Tegra$ sudo ./flash.sh jetson-agx-orin-devkit mmcblk0p1 #############################…

Update our own orin board failed, but update the attached demo orin board success

Robotics & Edge Computing Jetson Systems Jetson AGX Orin

WayneWWW July 20, 2022, 2:40am 3

Please follow the adaptation guide to disable the cvb eeprom read.

Cannot flash jetson orin nano with any method

Topic		Replies	Views
Can not flash Orin AGX "Reading board information failed" Jetson AGX Orin reflash	14	2684	January 9, 2023
Orin devkit 启动失败 Jetson AGX Orin boot , chinese	18	584	November 12, 2024
Orin flash Jetson AGX Orin reflash	1	308	November 25, 2024
No longer able to flash AGX Orin Devkit Jetson AGX Orin reflash	3	786	April 21, 2023
Orin flash Jetson AGX Orin reflash	3	536	April 2, 2024
Jetson AGX Orin Industrial烧录失败 Jetson AGX Orin reflash	2	722	November 10, 2023
Orin SOM can't flash with Orin Devkit CVB neither custom CVB? Jetson AGX Orin reflash	11	1670	June 30, 2022
Jetpack 5.0.2: Flashing: Parsing board information failed Jetson AGX Orin reflash	4	1689	September 15, 2022
How to flush to L4T and get access to bootloader of orin dev board? Jetson AGX Orin reflash	34	2642	September 12, 2022
Orin Flash Error Jetson AGX Orin reflash	2	1970	May 4, 2023

Update our own orin board failed, but update the attached demo orin board success

Related topics