Using the micro USB

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Xavier
1

Hi all,

I was wondering if it is possible to use the
“micro USB that is actually a ftdi serial connection” referenced in the
NVIDIA Jetson AGX Xavier Developer Kit - Introduction video from NVIDA?

My goal is to connect a device to that port and use it.
E.G. a serial unit such as the ATMEGA 328P Arduino.

3

Hi,
By default the micro-B port is for UART console. May not be able to connect to external device. For more information about Xavier developer kit, please take a look at
https://developer.nvidia.com/embedded/dlc/Jetson_AGX_Xavier_Developer_Kit_Carrier_Board_Specification