Wiring for multiple CSI cameras

I’m designing a circuit for adding 4x CSI cameras to the Jetson Nano.

It’s not clear how this can be achieved as the pinout for all 4 cameras seems to be missing the CLK_N and CLK_P for CSI1 (pins seem to be there for CSI0, CSI2, CSI3).

Any help on how to map the pins correctly would be appreciated.

Hi, you can see the CSI configuration in Table 37 in OEM DG. No clk pins needed for CSI1 as only 0,2,3,4 can be used for 4 cameras.