XAVIER NX I2C problem

Burn XAVIER NX using the command sudo./ nvmflash.sh
The following problem occurred. The I2C reading of the EEPROM failed. The printed information is as follows:

[ 2.0897 ] tegrarcm_v2 --isapplet
[ 2.0904 ] Applet version 01.00.0000
[ 2.1757 ]
[ 2.1766 ] tegrarcm_v2 --ismb2
[ 2.2587 ]
[ 2.2595 ] tegrahost_v2 --chip 0x19 --align nvtboot_applet_t194.bin
[ 2.2601 ]
[ 2.2608 ] tegrahost_v2 --chip 0x19 0 --magicid PLDT --appendsigheader nvtboot_applet_t194.bin zerosbk
[ 2.2614 ] adding BCH for nvtboot_applet_t194.bin
[ 2.2630 ]
[ 2.2644 ] tegrasign_v2 --key None --list nvtboot_applet_t194_sigheader.bin_list.xml --pubkeyhash pub_key.key
[ 2.2649 ] Assuming zero filled SBK key
[ 2.2650 ]
[ 2.2657 ] tegrahost_v2 --chip 0x19 0 --updatesigheader nvtboot_applet_t194_sigheader.bin.encrypt nvtboot_applet_t194_sigheader.bin.hash zerosbk
[ 2.2670 ]
[ 2.2676 ] tegrarcm_v2 --download mb2 nvtboot_applet_t194_sigheader.bin.encrypt
[ 2.2680 ] Applet version 01.00.0000
[ 2.3461 ] Sending mb2
[ 2.3461 ] […] 100%
[ 2.3689 ]
[ 2.3699 ] tegrarcm_v2 --boot recovery
[ 2.3706 ] Applet version 01.00.0000
[ 2.4552 ]
[ 3.4576 ] tegrarcm_v2 --isapplet
[ 3.5356 ]
[ 3.5364 ] tegrarcm_v2 --ismb2
[ 3.5368 ] MB2 Applet version 01.00.0000
[ 3.6340 ]
[ 3.6351 ] tegrarcm_v2 --ismb2
[ 3.6357 ] MB2 Applet version 01.00.0000
[ 3.7316 ]
[ 3.7329 ] Retrieving board information
[ 3.7339 ] tegrarcm_v2 --oem platformdetails chip chip_info.bin
[ 3.7349 ] MB2 Applet version 01.00.0000
[ 3.8184 ] Saved platform info in chip_info.bin
[ 3.8248 ] Chip minor revision: 2
[ 3.8249 ] Bootrom revision: 0xf
[ 3.8250 ] Ram code: 0x0
[ 3.8250 ] Chip sku: 0xde
[ 3.8251 ] Chip Sample: non es
[ 3.8263 ]
[ 3.8265 ] Retrieving EEPROM data
[ 3.8266 ] tegrarcm_v2 --oem platformdetails eeprom cvm /home/cgy/Xavier_NX/mfi_jetson-xavier-nx-devkit-emmc_20220512/bootloader/cvm.bin
[ 3.8272 ] MB2 Applet version 01.00.0000
[ 3.9176 ] 000000003636002a: E> I2C: Condition bus clear could not meet.
[ 3.9722 ]
[ 3.9722 ]
[ 3.9743 ] tegradevflash_v2 --oem platformdetails eeprom cvm /home/cgy/Xavier_NX/mfi_jetson-xavier-nx-devkit-emmc_20220512/bootloader/cvm.bin
[ 3.9750 ] CPU Bootloader is not running on device.
[ 4.0140 ]
Error: Return value 4
Command tegradevflash_v2 --oem platformdetails eeprom cvm /home/cgy/Xavier_NX/mfi_jetson-xavier-nx-devkit-emmc_20220512/bootloader/cvm.bin
Reading board information failed.
cgy@cgy:~/Xavier_NX/mfi_jetson-xavier-nx-devkit-emmc_20220512$

Start printing the following information

6.930499] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 7.621882] tegra-asoc: sound: ASoC: CODEC DAI rt5651-aif1 not registered

[ 7.622080] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 7.626669] tegra-asoc: sound: ASoC: CODEC DAI rt5651-aif1 not registered

[ 7.626857] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 7.629615] tegra-asoc: sound: ASoC: CODEC DAI rt5651-aif1 not registered

[ 7.629805] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 7.632190] tegra-asoc: sound: ASoC: CODEC DAI rt5651-aif1 not registered

[ 7.632376] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 7.636059] tegra-asoc: sound: ASoC: CODEC DAI rt5651-aif1 not registered

[ 7.636218] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 7.638588] tegra-asoc: sound: ASoC: CODEC DAI rt5651-aif1 not registered

[ 7.638999] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 7.641144] tegra-asoc: sound: ASoC: CODEC DAI rt5651-aif1 not registered

[ 7.641293] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 7.643627] tegra-asoc: sound: ASoC: CODEC DAI rt5651-aif1 not registered

[ 7.643811] tegra-asoc: sound: snd_soc_register_card failed (-517)

[ 10.127668] Bridge firewalling registered

[ 12.352867] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.353131] tegra-i2c 3160000.i2c: Un-recovered Arb lost

[ 12.353356] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.353579] tegra-i2c 3160000.i2c: Un-recovered Arb lost

[ 12.353774] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.353994] tegra-i2c 3160000.i2c: Un-recovered Arb lost

[ 12.354181] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.354435] tegra-i2c 3160000.i2c: Un-recovered Arb lost

[ 12.354620] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.354866] tegra-i2c 3160000.i2c: Un-recovered Arb lost

[ 12.355140] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.355457] tegra-i2c 3160000.i2c: Un-recovered Arb lost

[ 12.355653] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.355915] tegra-i2c 3160000.i2c: Un-recovered Arb lost

[ 12.356135] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.356375] tegra-i2c 3160000.i2c: Un-recovered Arb lost

[ 12.356867] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

Could you please help analyze what the reason is?

All device got the problem?

Not all devices have problems. The single board can run, but the serial port prints an I2C errors as follows

[ 12.352867] tegra-i2c 3160000.i2c: arb lost in communicate to add 0x64

[ 12.353131] tegra-i2c 3160000.i2c: Un-recovered Arb lost

如果进行烧录,这烧录失败 ,报如下错误:

If the burning fails, the following error will be reported:

[ 3.8272 ] MB2 Applet version 01.00.0000
[ 3.9176 ] 000000003636002a: E> I2C: Condition bus clear could not meet.
[ 3.9722 ]
[ 3.9722 ]
[ 3.9743 ] tegradevflash_v2 --oem platformdetails eeprom cvm /home/cgy/Xavier_NX/mfi_jetson-xavier-nx-devkit-emmc_20220512/bootloader/cvm.bin
[ 3.9750 ] CPU Bootloader is not running on device.
[ 4.0140 ]
Error: Return value 4
Command tegradevflash_v2 --oem platformdetails eeprom cvm /home/cgy/Xavier_NX/mfi_jetson-xavier-nx-devkit-emmc_20220512/bootloader/cvm.bin
Reading board information failed.

感觉是硬件问题,I2C坏了

It seems to be a hardware issue. The I2C is broken

Could you flash sdkmanager to check if check i2c problem instead of mass flash.

Thanks