|
I am trying to setup CX5 RDMA in between two KVM guests (one in each physical node) but failed with rping segfault ... in librdmacm.so.1.1.20.2. Is there any articles here I can follow to resolve the issue?
|
|
4
|
473
|
November 12, 2020
|
|
Bluefiled smartnic mode, x86 host pf(p4p1) ping nic pf representor(pf0hpf) fail, Destination Host Unreachable
|
|
1
|
365
|
October 12, 2020
|
|
Question on Host-chaining ConnectX5 card IP setup
|
|
3
|
173
|
July 8, 2020
|
|
Hi
I am using a MT27520 Family [ConnectX-3 Pro] 10G dual port card with SR-IOV enable, but the vf can not set to promisc mode, how can I debug what heppen? Meanwhile I have a ConnectX-3 Pro 40G nic but without this error.
|
|
1
|
161
|
June 22, 2020
|
|
Configure link state as seen by the VF in ESXi
|
|
2
|
101
|
December 18, 2019
|
|
Why is my softroce bandwidth (2Gbps) much lower than the tcp bandwidth(10Gbps)?
|
|
1
|
105
|
November 14, 2019
|
|
Esxi - ConnectX-2 - Can Ping but cant pass traffic
|
|
2
|
105
|
October 28, 2019
|
|
How do you avoid having all tcp/ip traffic routed through MGMT0 when your default route gateway is on the same vlan as the MGMT0 interface.
|
|
1
|
105
|
October 23, 2019
|
|
Unable to use connect-X3 on ubuntu 18 with ethernet because there is no LINK_TYPE_P1 option
|
|
4
|
227
|
October 4, 2019
|
|
IP over Infiniband @ FreeBSD 11.2: fatal Kernel trap 12 after packet length >2044 bytes in connected mode
|
|
3
|
154
|
September 9, 2019
|
|
I would like to do ShareIO with ConnectX-5 MT27800 between two servers, but, the second server which has Auxiliary Card installed cannot be ping by other server.
|
|
6
|
134
|
September 3, 2019
|