AGX Orin 32G FAB501 flash failed JP5.1.1

[pohsuan.hsu]

Hi nvidia teams

I have flashed the AGX Orin 32GB Fab501 with JP5.1.1 and encountered an error message.
I have tried this with three Fab501 32GB modules, and all resulted in the same error.
However, I was able to successfully flash AGX Orin 32GB non-Fab501 modules and AGX Orin 64GB modules, both Fab501 and non-Fab501, without any issues.

Would you please give me some advice about this situation, thank you
I get the host flash log and Debug UART log as attachment

[  43.2008 ] ERROR: might be timeout in USB write.
Error: Return value 3
Command tegrarcm_v2 --chip 0x23 0 --pollbl --download bct_mem mem_rcm_sigheader.bct.encrypt --download blob blob.bin
Failed flashing t186ref.

USBTimeout.txt (71.2 KB)
putty.log (9.9 KB)

[DaveYYY]

You need this:
https://developer.nvidia.com/downloads/embedded/l4t/r35_release_v3.1/overlay_pcn210361_pcn210100_r35.3.1.tbz2

[pohsuan.hsu]

Hi DaveYYY

感謝您的協助
在更新完您提供的壓縮檔後
已經可以正常更新 AGX Orin 32G FAB501 模組，也可以正常更新其他型號的 AGX Orin 模組
以上謝謝