Configure DP-AUX0 and DP-AUX1 as I2C

[WayneWWW]

We only have document for TX2. But should be same to Xavier too.

TX2 use i2c4 (dp1_aux_ch)

Below step was been verified by partner to enable I2C4 and I2C6 to be used as I2C busses / { host1x { /* 1) Disable anything that would activate HDMI or DisplayPort drivers */ nvdisplay@15200000 { status = "disabled"; }; nvdisplay@15210000 { status = "disabled"; }; nvdisplay@15220000 { status = "disabled"; }; sor { status = "disabled"; }; sor1 { status = "disabled"; hdmi-display { status = "disabled"; }; dp-display { status = "disabled"; }; }; dsi { status = "disabled";…

Welcome — Jetson Linux<br/>Developer Guide 34.1 documentation → To configure the pinmux setting of i2c-4 and i2c-6