DP0_AUX_CH+/- mapping and general I2C usage

Autonomous Machines Jetson & Embedded Systems Jetson TX1
1

Hello. I have two questions about using the DP0_AUX_CH+/-.

  1. Can I use this as a general purpose I2C port as indicated if I am not using it for the eDP.
  2. What is the mapping to I2C_CLK & I2C_DAT from DP0_AUX_CH+ and DP0_AUX_CH-? There are no indications in the documentation on which DP0_AUX_CH+ or DP0_AUX_CH- maps to I2C_CLK or I2C_DAT.

Thanks

2

You can check the pinmux sheet in download zone and set it to I2C6

DP0_AUX_CH+: I2C6_CLK
DP0_AUX_CH-: I2C6_DAT