Hi, I want to enable MIPI DSI panel on a homebrew carrier. To make sure whether DSI initial code is sent from Jetson Nano SoM, we measured signals of pin DSI_D0_P on SoM by using a oscilloscope, and use Jetson Nano P3450 as carrier board. During the measurement, we found there are no DSI initial co…

[1abbd3bfa7fb48f7814090c7727642ba31fb2594] Current docs in DLC are all for B01, so I marked the TP80 on your picture.

DSI panel initial commands are sent, but there are no signals from pin DSI_D0_P. Any advice?

fdtsaid March 20, 2020, 7:16am 8

Do “B01” , “A02” represent carrier board type? At the back of carrier board, there is “180-13449-DAAF-A02”.

Connect DSI display with B01 Jetson Nano carrier board

Topic		Replies	Views
Mipi-dsi lcd for jetson tx2 Jetson TX2 dsi-display	9	1186	November 22, 2021
Require x2 lane Display compatible with NVDIA platform Jetson Nano dsi-display	10	1506	November 10, 2021
Device tree DSI display init commands Jetson TX1	24	9190	October 18, 2021
Help with switching modes between SPI and GPIO and Activation of ST7701S MIPI-DSI Jetson Nano board-design	33	2158	September 8, 2023
TX2 DSIA CLK have no output Jetson TX2 camera	6	660	December 7, 2022
MIPI DSI display on Jetson TX2 Jetson TX2	7	2341	February 19, 2020
DSI display Jetson TK1	22	7289	October 18, 2021
DSI panel setup issues Jetson TX2	4	786	July 3, 2018
Turn off HDMI programmatically Jetson TX2	60	4623	December 19, 2018
Jetson TX1 DSC of MIPI DSI. Jetson TX1	19	5635	October 18, 2021