Error with Flint: Can not create SignatureManager!

Infrastructure & Networking Software And Drivers WinOF Driver
1

Hello.

I have an firmware error with an very old ConnextX-2

with “mst status”

MST devices:

mt26448_pci_cr0
mt26448_pciconf0

flint -d mt26448_pci_cr0 query
Failed to identify the device - Can not create SignatureManager!
Image type: FS2
FW Version: 2.9.1200
Rom Info: type=PXE version=3.3.400 proto=VPI
Device ID: 26448
Description: Port1 Port2
MACs: 0002c9525744 0002c9525745
VSD:
PSID: MT_0F60110010

i downloaded the lastest firmware and flash the rom with
“flint -d mt26448_pci_cr0 -i C:\Temp\fw-ConnectX2-rel-2_9_1200-MNPA19_A1-A3-FlexBoot-3.3.400.bin burn”

just an small question, is it possible to resolve this problem ?

thanks in advance

2

mlxfwmanager:
Querying Mellanox devices firmware …
Failed to identify the device - Can not create SignatureManager!
Failed to identify the device - Can not create SignatureManager!

Device #1:

Device Type: ConnectX2
Part Number: MNPA19_A1-A3
Description: ConnectX-2 Lx EN network interface card; single-port SFP+; PCIe2.0 5.0GT/s; mem-free; RoHS R6
PSID: MT_0F60110010
PCI Device Name: mt26448_pci_cr0
Port1 MAC: 0002c9525744
Port2 MAC: 0002c9525745
Versions: Current Available
FW 2.9.1200 N/A
PXE 3.3.0400 N/A

Status: No matching image found

Any idea please ?

3

Hello, please be aware that ConnectX-2 cards reached their end-of-life and end-of-support phases over four years ago.

4

Hello,

Thank you for your reply.

So, on this forum, no one can help me and tell me if this is normal?