Filled

Robotics & Edge Computing Jetson & Embedded Systems Jetson Nano
1

I am using Jetson Nano developer kit and I was able to boot normall, but after I try sudo apt-get upgrade, the system did not load up and did not boot. I cannot control anything. I tried to flash image into sd card and still it cant boot normally. What is going on?

5

Hi,

What is your JP/BSP version?
Do you modify the file /etc/apt/sources.list.d/nvidia-l4t-apt-source.list

Thanks

6

٢٠٢٥٠٥٠٥_٢٢٢٩٤٥
٢٠٢٥٠٥٠٥_٢٢٢٩٤٥1420×2420 398 KB

٢٠٢٥٠٥٠٥_٢٢٣٣١٩
٢٠٢٥٠٥٠٥_٢٢٣٣١٩1564×1956 332 KB

٢٠٢٥٠٥٠٧_٠٢٤٤٢٤
٢٠٢٥٠٥٠٧_٠٢٤٤٢٤1816×4032 797 KB

٢٠٢٥٠٥٠٧_٠٢٤٩٤٩
٢٠٢٥٠٥٠٧_٠٢٤٩٤٩1920×865 147 KB

نننن
نننن1920×1080 74.2 KB

I don’t know what the problem is when booting up. It’s an installation problem.

7

Hi,

It might be a custom board you are using.
Please flash again to get the clean environment
When you want to do sudo apt upgrade, please comment /etc/apt/sources.list.d/nvidia-l4t-apt-source.list.

Thanks

9

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.