Flash TX2 NX

[hw.yufei.shi]

Hi,I want to flash TX2 NX module.
Before,I use xavier nx module and customized board,and use"./ flash.sh P3449-0000+p3668-0001-qspi-emmc mmcblk0p1"this command can flash successful.
Now, I use the same customized board and TX2 NX module,and use “./ flash.sh jetson-xavier-nx-devkit-tx2-nx mmcblk0p1” this command.After completion the flash，the TX2 NX can not open and always on this page.

So, how do i to flash the TX2 Nx

[JerryChang]

@hw.yufei.shi

I use the same customized board

hello hw.yufei.shi,

as you can see, the flash configuration it works with TX2 NX SOM (p3636) and Xavier NX carrier board (p3509).
please use your flash configuration file since you’re having your customized board.

[hw.yufei.shi]

Where can I read related documents about flash configuration?
Thanks

[JerryChang]

check this, Jetson TX2 Platform Adaptation and Bring-Up.

[hw.yufei.shi]

Thanks