What location is JetPack being run from on the host? I’m guessing you are running JetPack from perhaps some temporary media location. I’m trying to narrow down where on the host PC the “mnt/” directory is which it is referring to since it is a relative path. If this is some sort of alternate or temporary file system (e.g., an SD card or USB disk), can you describe the storage device?
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Substitute Jetson TX1 module with TX2 in the development kit | 16 | 2809 | October 18, 2021 | |
| Jetson TX2 failed to flash on Jetpack 3.1 | 21 | 7791 | October 18, 2021 | |
| Jetson TX2 Flash & JetPack 3.2 Install | 6 | 2494 | October 18, 2021 | |
| Grinch kernel flash failed: Read-only filesystem | 5 | 1372 | December 11, 2014 | |
| Jetson Tk1 - issue with re-flashing the board and the mkgpt binary | 28 | 7536 | July 16, 2015 | |
| Unable to flash TX2 with Jetpack 3.1 -> "The system is running in low graphics mode" | 4 | 1210 | October 18, 2021 | |
| TX2 flashing : CPU Bootloader is not running on device. Error: Return value 4 | 32 | 10098 | January 15, 2020 | |
| Jetson TX1 error on booting. | 18 | 4104 | July 27, 2016 | |
| Failed to flash device | 10 | 4657 | October 18, 2021 | |
| Jetpack 2.3 installation. 64 bit on the SD card lead to a mistake | 7 | 1501 | October 18, 2021 |