Heterogeneous Frame Synchronization Pin connection Incorrect

[snow.yin]

yes, below are test observation.

modify only gen380, without multiplex option, frame rate remain 30. (due to gen480 is 30)

modify only gen380, with multiplex option select 3, frame rate changed according to it.

modify only gen480, without multiplex option, frame rate changed according to it.

I got same test result as “Deser-D: Generator 2 (FSYNC3)”

IMX728 framerate remains the same despite modifying Fsync generator

Shortly after writing this post, I realized that Generator 0 maps to Deser-E, but not Deser-D. My understanding of the Generator to Deserializer mapping is as follows: Deser-E: Generator 0 (FSYNC1) Deser-D: Generator 2 (FSYNC3) Deser-C: Generator 2 (FSYNC3) Deser-A: Generator 3 (FSYNC2) Deser-B: Generator 0 (FSYNC1) Could you confirm this?