How to use the nvidia display DP-SERIALIZER to Monitor(eg: DELL,HP. HDMI or DP )

Please provide the following info (tick the boxes after creating this topic):
Software Version
DRIVE OS 6.0.6
DRIVE OS 6.0.5
DRIVE OS 6.0.4 (rev. 1)
DRIVE OS 6.0.4 SDK
other

Target Operating System
Linux
QNX
other

Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
DRIVE AGX Orin Developer Kit (not sure its number)
other p3663-a01

SDK Manager Version
1.9.2.10884
other

Host Machine Version
native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other

dear experts:
I would like to setup gmls output to connect to dell display(by HDMI ) due to p3663-a01 not Exposed dp/hdmi interface.

follow the link driveOs nvdisplay , it not describe how to use connect display.
can you suggest the supporting deserializer wich can connect the display? after that I will try SST mode by use the opengles2 sample to try.

Please confirm if you are using P3663?
Please note that neither PDK nor P3663 are supported through the forum. If you are unsure of the appropriate support channel, please contact your NVIDIA representative for assistance.

I am very curious that the nvdisplay function as description on the sdk. and other issue link Using nvidia drm/kms display kernel module failed with memory allocation error also mention the p3663, I see you give the support and answer…
on my opinion, the sdk scope can be getting supoort not relate to any board.

We have the rule to support account customer, you should get the support via another channel than forum.

understood, very thanks for your support

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.