MIPI interface Jetson TX2 Carrier Board missconception regarding DSI3_CLK vs DSI2_CLK

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

I find it confusing when I work throue to do a interface MIPI DSI (Display) where:

DSI2_CLK+/-

Not was find in Table 11 on pdf doc “Jetson TX1/TX2 Developer Kit Carrier Board Specification”
Only DSI3_CLK+/- on two places in Table-11
I was then cross check this on P2597_B04_OrCAD_schematics.pdf and find more resonable that
DSI2_CLK+ connect to J23.p15
DSI2_CLK- connect to J23.p13

Best Regards
Olle Welin
olle@dst.se

2

Hi olle_welin, thanks for your finding, we are checking it and will update if necessary.