Hello everyone,
will jetson nano driver for imx477 ( https://developer.nvidia.com/rpi-imx477-support-nano-2gb-325 ) work with multiple (3) raspberry pi hq cameras on custom carrier board?
or custom driver is needed for this?
Hi,
The driver is specific to Nano 2GB devkit + single Pi Hi Q camera. Does not work for other platforms. For Nano 4GB/Xavier NX devkits, there is a 3rdparty solution:
Raspberry Pi HQ camera IMX477 Driver | Linux driver for Jetson | RidgeRun
If you use custom board, would need to refer to sensor driver programming guide for driver porting.