NVIDIA Jetson AGX Xavier interface with Wifi Module(ST60-2230C-U) issue

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier
1

Hi Team, While interface ST60 wifi module we got error. Please help us to come this problem.
Below mentioned interface steps and components are used.

Hardware used:
PC: Linux PC (non-VM) with Ubuntu 20 installed
SDK: Nvidia Jetson AGX Xavier
Wifi Module: ST60-2230C-U

Software used:
Jetpack V5.0.2 Rel1.0
backports-laird-10.4.0.10.tar.bz2
laird-sterling60-firmware-usb-uart-10.4.0.10.tar.bz2

connector: Below mentioned connector is used in Jetson Software development kit.
[J505] M.2 Key E connector used for wireless networking card.
Reference Links:

We got below errors in Dmeg!!!
[ 9.890100] htd-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3610000.xhci-4.4/Input1
[ 13.294387] ieee80211 phy0: Lrdmwl: found firmware image <lrdmwl/88W8997_usb.bin>
[ 13.296564] ieee00211 phy0:usb_bulk_nsg for tx failed: -71
[ 13.298672] ieees0211 phy0:usb_bulk_msg for tx failed: -71
[ 13.300714] ieee60211 phy0:usb_bulk_nsg for tx falled: -71
[ 13.303268] ieee80211 phy0: Lrdmwl: Firmware download/init failed! <lrdmwl/88W8997_usb.bin> -1

May be the current UPHY for J505 M.2 E slot is currently in PCIe and needs to changed to USB ?
Do we need to do any change in AGX Xavier DTS files like UPHY, ODMDATA ?

Thank you for helping us to get out this kind of tough situation.

3

Hi,
We don’t have experience about using the device. Does it connect to Xavier developer kit through USB? Or PCIe Key-E slot?

4

Thanks for your reply… We used M.2 Key E connector(USB-wifi and UART for bluetooth) from 32GB Jetson AGX development kit.

5

Hi,
The supported device has to be WIFI(PCIe) and BT(USB). Such as Intel® Dual Band Wireless-AC 8265. USB-wifi and UART for bluetooth may not work.

7

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.