Reflashing a Jetson Orin Nano

[bserhan]

Good afternoon,

I am trying to reflash a Jetson Orin Nano due to a WiFi connection issue, but the flashing process for Jetson Linux stops at around 80% (I’ve attached the log from SDK Manager).

When I connect the device to peripherals, it still boots up (though I am not sure if the OS installation is stable).

Could you help me understand why these errors occur during the flashing process, please?

Best wishes,
baris

SDKM_logs_JetPack_6.0_(rev._1)_Linux_for_Jetson_Orin_Nano_modules_2024-05-29_13-44-59.zip (190.4 KB)

[WayneWWW]

looks related to NFS server issue.

Flash Error (Flash Jetson Linux - flash: [ 0.0106 ] ERROR: failed to read rcm_state)

Error log is : mount.nfs: Connection timed out Flash failure Either the device cannot mount the NFS server on the host or a flash command has failed. Debug log saved to /tmp/tmp.HVseonQElu. You can access the target's terminal through "sshpass -p root ssh root@fc00:1:1:0::2" Cleaning up... Is your host PC blocking the mount of NFS server?

[bserhan]

Thanks, after I disabled the firewall it worked fine.