Tegra-usb-cd usb_cd: otg phy is not available yet

[DaneLLL]

Hi,
Please refer to the posts:

Third USB on custom board not working with JetPack 4.2

Hi all, I managed to get this working. It seems like the new L4T sets the vbus-supply within the xusb_padctl@3520000 node as well as the power tree? I’ve rolled my changes into the patch below Index: hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts <+>UTF-8 =================================================================== --- hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts (date 1552067277000) +++ hardware/nvi…

USB not working in Jetson TX2 - R32.2

Hi, On r32.2, please check below part in tegra186-quill-p3310-1000-a00-00-base.dts xhci@3530000 { status = "okay"; phys = <&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-0}>, <&{/xusb_padctl@3520000/pads/usb2/lanes/usb2-1}>, <&{/xusb_padctl@3520000/pads/usb3/lanes/usb3-1}>; phy-names = "usb2-0", "usb2-1", "usb3-1"; }; xusb_padctl@3520000 { status = "okay"; pinctrl-0 = <&vbus_en0_default_state>; pinctrl-1 = <&vbus_en1_default_state>; pinctrl-2 = <&vbus_…