Hello:
I am using ubuntu 14.04LTS at my desktop with Geforce 730M. After I install NVIDIA-Linux-x86_64-384.69.run driver, the os cannot start and block in x-server.I hope you can give me some advices. Relevent files is following:
xorg.conf:
nvidia-xconfig: X configuration file generated by nvidia-xconfig
nvidia-xconfig: version 384.69 (buildmeister@swio-display-x86-rhel47-06) Wed Aug 16 20:57:01 PDT 2017
Section “ServerLayout”
Identifier “layout”
Screen 0 “nvidia” 0 0
Inactive “intel”
InputDevice “Keyboard0” “CoreKeyboard”
InputDevice “Mouse0” “CorePointer”
EndSection
Section “InputDevice”
# generated from default
Identifier “Keyboard0”
driver “keyboard”
EndSection
Section “InputDevice”
# generated from default
Identifier “Mouse0”
Driver “mouse”
Option “Protocol” “auto”
Option “Device” “/dev/psaux”
Option “Emulate3Buttons” “no”
Option “ZAxisMapping” “4 5”
EndSection
Section “Monitor”
Identifier “Monitor0”
VendorName “Unknown”
ModelName “Unknown”
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option “DPMS”
EndSection
Section “Device”
Identifier “intel”
Driver “modesetting”
BusID “PCI:0@0:2:0”
EndSection
Section “Device”
Identifier “nvidia”
Driver “nvidia”
BusID “PCI:1@0:0:0”
EndSection
Section “Screen”
Identifier “intel”
Device “intel”
Monitor “Monitor0”
EndSection
Section “Screen”
Identifier “nvidia”
Device “nvidia”
Monitor “Monitor0”
DefaultDepth 24
Option “AllowEmptyInitialConfiguration” “on”
Option “ConstrainCursor” “off”
SubSection “Display”
Depth 24
Modes “nvidia-auto-select”
EndSubSection
EndSection
Xorg.1.log:
[ 4839.199]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 4839.202] X Protocol Version 11, Revision 0
[ 4839.202] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 4839.203] Current Operating System: Linux blair-ThinkPad-T540p 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64
[ 4839.203] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-32-generic root=UUID=0851d1fc-d02c-4efe-bd24-daaec2e30a6b ro quiet splash vt.handoff=7
[ 4839.205] Build Date: 16 April 2014 01:36:29PM
[ 4839.206] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see Enterprise open source support | Ubuntu)
[ 4839.207] Current version of pixman: 0.30.2
[ 4839.209] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4839.209] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4839.211] (==) Log file: “/var/log/Xorg.1.log”, Time: Thu Aug 31 09:59:06 2017
[ 4839.212] (==) Using config file: “/etc/X11/xorg.conf”
[ 4839.213] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 4839.213] (==) ServerLayout “layout”
[ 4839.213] () |–>Screen “nvidia” (0)
[ 4839.213] () | |–>Monitor “Monitor0”
[ 4839.213] () | |–>Device “nvidia”
[ 4839.213] () |–>Inactive Device “intel”
[ 4839.213] () |–>Input Device “Keyboard0”
[ 4839.213] (**) |–>Input Device “Mouse0”
[ 4839.213] (==) Automatically adding devices
[ 4839.213] (==) Automatically enabling devices
[ 4839.213] (==) Automatically adding GPU devices
[ 4839.213] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
[ 4839.213] Entry deleted from font path.
[ 4839.213] (WW) The directory “/usr/share/fonts/X11/100dpi/” does not exist.
[ 4839.213] Entry deleted from font path.
[ 4839.213] (WW) The directory “/usr/share/fonts/X11/75dpi/” does not exist.
[ 4839.213] Entry deleted from font path.
[ 4839.213] (WW) The directory “/usr/share/fonts/X11/100dpi” does not exist.
[ 4839.213] Entry deleted from font path.
[ 4839.213] (WW) The directory “/usr/share/fonts/X11/75dpi” does not exist.
[ 4839.213] Entry deleted from font path.
[ 4839.213] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4839.213] (==) ModulePath set to “/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules”
[ 4839.213] (WW) Hotplugging is on, devices using drivers ‘kbd’, ‘mouse’ or ‘vmmouse’ will be disabled.
[ 4839.213] (WW) Disabling Keyboard0
[ 4839.213] (WW) Disabling Mouse0
[ 4839.213] (II) Loader magic: 0x7f3c51694d60
[ 4839.213] (II) Module ABI versions:
[ 4839.213] X.Org ANSI C Emulation: 0.4
[ 4839.213] X.Org Video Driver: 15.0
[ 4839.213] X.Org XInput driver : 20.0
[ 4839.213] X.Org Server Extension : 8.0
[ 4839.214] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4839.214] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4839.215] (–) PCI:*(0:0:2:0) 8086:0416:17aa:2211 rev 6, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 4839.215] (–) PCI: (0:1:0:0) 10de:1290:17aa:2211 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128
[ 4839.216] Initializing built-in extension Generic Event Extension
[ 4839.216] Initializing built-in extension SHAPE
[ 4839.217] Initializing built-in extension MIT-SHM
[ 4839.218] Initializing built-in extension XInputExtension
[ 4839.218] Initializing built-in extension XTEST
[ 4839.219] Initializing built-in extension BIG-REQUESTS
[ 4839.220] Initializing built-in extension SYNC
[ 4839.221] Initializing built-in extension XKEYBOARD
[ 4839.221] Initializing built-in extension XC-MISC
[ 4839.222] Initializing built-in extension SECURITY
[ 4839.222] Initializing built-in extension XINERAMA
[ 4839.223] Initializing built-in extension XFIXES
[ 4839.224] Initializing built-in extension RENDER
[ 4839.224] Initializing built-in extension RANDR
[ 4839.225] Initializing built-in extension COMPOSITE
[ 4839.225] Initializing built-in extension DAMAGE
[ 4839.226] Initializing built-in extension MIT-SCREEN-SAVER
[ 4839.226] Initializing built-in extension DOUBLE-BUFFER
[ 4839.227] Initializing built-in extension RECORD
[ 4839.227] Initializing built-in extension DPMS
[ 4839.228] Initializing built-in extension Present
[ 4839.228] Initializing built-in extension DRI3
[ 4839.229] Initializing built-in extension X-Resource
[ 4839.229] Initializing built-in extension XVideo
[ 4839.230] Initializing built-in extension XVideo-MotionCompensation
[ 4839.230] Initializing built-in extension SELinux
[ 4839.231] Initializing built-in extension XFree86-VidModeExtension
[ 4839.231] Initializing built-in extension XFree86-DGA
[ 4839.231] Initializing built-in extension XFree86-DRI
[ 4839.232] Initializing built-in extension DRI2
[ 4839.232] (II) LoadModule: “glx”
[ 4839.232] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4839.236] (II) Module glx: vendor=“NVIDIA Corporation”
[ 4839.237] compiled for 4.0.2, module version = 1.0.0
[ 4839.237] Module class: X.Org Server Extension
[ 4839.237] (II) NVIDIA GLX Module 384.69 Wed Aug 16 19:34:06 PDT 2017
[ 4839.237] Loading extension GLX
[ 4839.237] (II) LoadModule: “nvidia”
[ 4839.237] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4839.237] (II) Module nvidia: vendor=“NVIDIA Corporation”
[ 4839.237] compiled for 4.0.2, module version = 1.0.0
[ 4839.237] Module class: X.Org Video Driver
[ 4839.237] (II) LoadModule: “modesetting”
[ 4839.237] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4839.238] (II) Module modesetting: vendor=“X.Org Foundation”
[ 4839.238] compiled for 1.15.0, module version = 0.8.1
[ 4839.238] Module class: X.Org Video Driver
[ 4839.238] ABI class: X.Org Video Driver, version 15.0
[ 4839.238] (II) NVIDIA dlloader X Driver 384.69 Wed Aug 16 19:07:09 PDT 2017
[ 4839.238] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4839.238] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4839.238] (–) using VT number 8
[ 4839.241] (II) Loading sub module “fb”
[ 4839.241] (II) LoadModule: “fb”
[ 4839.241] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4839.241] (II) Module fb: vendor=“X.Org Foundation”
[ 4839.241] compiled for 1.15.1, module version = 1.0.0
[ 4839.241] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4839.241] (II) Loading sub module “wfb”
[ 4839.241] (II) LoadModule: “wfb”
[ 4839.241] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4839.241] (II) Module wfb: vendor=“X.Org Foundation”
[ 4839.241] compiled for 1.15.1, module version = 1.0.0
[ 4839.241] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4839.241] (II) Loading sub module “ramdac”
[ 4839.241] (II) LoadModule: “ramdac”
[ 4839.241] (II) Module “ramdac” already built-in
[ 4839.241] (II) modesetting(G0): using drv /dev/dri/card0
[ 4839.241] () NVIDIA(0): Depth 24, (–) framebuffer bpp 32
[ 4839.241] (==) NVIDIA(0): RGB weight 888
[ 4839.241] (==) NVIDIA(0): Default visual is TrueColor
[ 4839.241] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4839.242] () NVIDIA(0): Option “ConstrainCursor” “off”
[ 4839.242] () NVIDIA(0): Option “AllowEmptyInitialConfiguration” “on”
[ 4839.242] () NVIDIA(0): Enabling 2D acceleration
[ 4839.245] (II) NVIDIA(0): NVIDIA GPU GeForce GT 730M (GK208) at PCI:1:0:0 (GPU-0)
[ 4839.245] (–) NVIDIA(0): Memory: 1048576 kBytes
[ 4839.245] (–) NVIDIA(0): VideoBIOS: 80.28.2a.00.30
[ 4839.245] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[ 4839.245] (II) NVIDIA(0): Validated MetaModes:
[ 4839.245] (II) NVIDIA(0): “NULL”
[ 4839.245] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 4839.245] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 4839.245] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 4839.245] () modesetting(G0): Depth 24, (–) framebuffer bpp 32
[ 4839.245] (==) modesetting(G0): RGB weight 888
[ 4839.245] (==) modesetting(G0): Default visual is TrueColor
[ 4839.245] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 4839.246] (II) modesetting(G0): Output eDP-1-0 using monitor section Monitor0
[ 4839.246] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 4839.246] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[ 4839.260] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 4839.260] (II) modesetting(G0): Output DisplayPort-1-1 has no monitor section
[ 4839.260] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
[ 4839.260] (II) modesetting(G0): EDID for output eDP-1-0
[ 4839.260] (II) modesetting(G0): Manufacturer: CMN Model: 15b4 Serial#: 0
[ 4839.260] (II) modesetting(G0): Year: 2011 Week: 48
[ 4839.260] (II) modesetting(G0): EDID Version: 1.4
[ 4839.260] (II) modesetting(G0): Digital Display Input
[ 4839.260] (II) modesetting(G0): 6 bits per channel
[ 4839.260] (II) modesetting(G0): Digital interface is DisplayPort
[ 4839.260] (II) modesetting(G0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 4839.260] (II) modesetting(G0): Gamma: 2.20
[ 4839.260] (II) modesetting(G0): No DPMS capabilities specified
[ 4839.260] (II) modesetting(G0): Supported color encodings: RGB 4:4:4
[ 4839.260] (II) modesetting(G0): First detailed timing is preferred mode
[ 4839.260] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
[ 4839.260] (II) modesetting(G0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 4839.260] (II) modesetting(G0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 4839.260] (II) modesetting(G0): Manufacturer’s mask: 0
[ 4839.260] (II) modesetting(G0): Supported detailed timing:
[ 4839.260] (II) modesetting(G0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 4839.260] (II) modesetting(G0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 4839.260] (II) modesetting(G0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 4839.260] (II) modesetting(G0): N156BGE-E11
[ 4839.260] (II) modesetting(G0): CMN
[ 4839.260] (II) modesetting(G0): N156BGE-E11
[ 4839.260] (II) modesetting(G0): EDID (in hex):
[ 4839.260] (II) modesetting(G0): 00ffffffffffff000daeb41500000000
[ 4839.260] (II) modesetting(G0): 30150104952313780200259e57529929
[ 4839.260] (II) modesetting(G0): 15505400000001010101010101010101
[ 4839.260] (II) modesetting(G0): 010101010101141b5664500014301022
[ 4839.260] (II) modesetting(G0): 260058c110000018000000fe004e3135
[ 4839.260] (II) modesetting(G0): 364247452d4531310a20000000fe0043
[ 4839.260] (II) modesetting(G0): 4d4e0a202020202020202020000000fe
[ 4839.260] (II) modesetting(G0): 004e3135364247452d4531310a200078
[ 4839.261] (II) modesetting(G0): Not using mode “1366x768” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “800x600” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “400x300” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “800x600” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “400x300” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “1024x768” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “512x384” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “640x480” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “640x512” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “800x600” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “896x672” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “928x696” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “960x720” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “576x432” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “1360x768” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “680x384” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “1360x768” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “680x384” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “700x525” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “720x450” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “800x512” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “840x525” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “840x525” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “960x540” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “960x600” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Not using default mode “1024x768” (hsync out of range)
[ 4839.261] (II) modesetting(G0): Printing probed modes for output eDP-1-0
[ 4839.261] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4839.261] (II) modesetting(G0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 4839.262] (II) modesetting(G0): EDID for output VGA-1-0
[ 4839.262] (II) modesetting(G0): EDID for output DisplayPort-1-0
[ 4839.276] (II) modesetting(G0): EDID for output HDMI-1-0
[ 4839.276] (II) modesetting(G0): EDID for output DisplayPort-1-1
[ 4839.276] (II) modesetting(G0): EDID for output HDMI-1-1
[ 4839.276] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4839.276] (==) modesetting(G0): DPI set to (96, 96)
[ 4839.276] (II) Loading sub module “fb”
[ 4839.276] (II) LoadModule: “fb”
[ 4839.276] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4839.276] (II) Module fb: vendor=“X.Org Foundation”
[ 4839.276] compiled for 1.15.1, module version = 1.0.0
[ 4839.276] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4839.276] (II) Loading sub module “shadow”
[ 4839.276] (II) LoadModule: “shadow”
[ 4839.276] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 4839.276] (II) Module shadow: vendor=“X.Org Foundation”
[ 4839.276] compiled for 1.15.1, module version = 1.1.0
[ 4839.276] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4839.276] (–) Depth 24 pixmap format is 32 bpp
[ 4839.276] (==) modesetting(G0): Backing store enabled
[ 4839.276] (==) modesetting(G0): Silken mouse enabled
[ 4839.276] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4839.277] () modesetting(G0): DPMS enabled
[ 4839.277] (WW) modesetting(G0): Option “AllowEmptyInitialConfiguration” is not used
[ 4839.277] (WW) modesetting(G0): Option “ConstrainCursor” is not used
[ 4840.290] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[ 4840.290] (II) NVIDIA: access.
[ 4840.322] (II) NVIDIA(0): Setting mode “NULL”
[ 4840.323] Loading extension NV-GLX
[ 4840.328] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4840.328] (==) NVIDIA(0): Backing store enabled
[ 4840.328] (==) NVIDIA(0): Silken mouse enabled
[ 4840.328] () NVIDIA(0): DPMS enabled
[ 4840.328] Loading extension NV-CONTROL
[ 4840.328] (II) Loading sub module “dri2”
[ 4840.328] (II) LoadModule: “dri2”
[ 4840.328] (II) Module “dri2” already built-in
[ 4840.328] (II) NVIDIA(0): [DRI2] Setup complete
[ 4840.328] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 4840.328] (–) RandR disabled
[ 4840.331] (II) SELinux: Disabled on system
[ 4840.332] (II) Initializing extension GLX
[ 4840.492] (II) modesetting(G0): Damage tracking initialized
[ 4840.511] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 4840.513] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4840.513] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 4840.513] (II) LoadModule: “evdev”
[ 4840.513] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4840.513] (II) Module evdev: vendor=“X.Org Foundation”
[ 4840.513] compiled for 1.15.0, module version = 2.8.2
[ 4840.513] Module class: X.Org XInput Driver
[ 4840.513] ABI class: X.Org XInput driver, version 20.0
[ 4840.513] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 4840.513] () Power Button: always reports core events
[ 4840.513] () evdev: Power Button: Device: “/dev/input/event2”
[ 4840.513] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 4840.513] (–) evdev: Power Button: Found keys
[ 4840.513] (II) evdev: Power Button: Configuring as keyboard
[ 4840.513] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2”
[ 4840.513] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
[ 4840.513] () Option “xkb_rules” “evdev”
[ 4840.513] () Option “xkb_model” “pc105”
[ 4840.513] () Option “xkb_layout” “cn”
[ 4840.514] (II) XKB: reuse xkmfile /var/lib/xkb/server-196B0DDCF5DB28BABBE74857F932BB3225CFF747.xkm
[ 4840.515] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 4840.515] () Video Bus: Applying InputClass “evdev keyboard catchall”
[ 4840.515] (II) Using input driver ‘evdev’ for ‘Video Bus’
[ 4840.515] () Video Bus: always reports core events
[ 4840.515] () evdev: Video Bus: Device: “/dev/input/event9”
[ 4840.515] (–) evdev: Video Bus: Vendor 0 Product 0x6
[ 4840.515] (–) evdev: Video Bus: Found keys
[ 4840.515] (II) evdev: Video Bus: Configuring as keyboard
[ 4840.515] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9”
[ 4840.515] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD, id 7)
[ 4840.515] () Option “xkb_rules” “evdev”
[ 4840.515] () Option “xkb_model” “pc105”
[ 4840.515] () Option “xkb_layout” “cn”
[ 4840.515] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 4840.515] () Video Bus: Applying InputClass “evdev keyboard catchall”
[ 4840.515] (II) Using input driver ‘evdev’ for ‘Video Bus’
[ 4840.515] () Video Bus: always reports core events
[ 4840.515] () evdev: Video Bus: Device: “/dev/input/event10”
[ 4840.515] (–) evdev: Video Bus: Vendor 0 Product 0x6
[ 4840.515] (–) evdev: Video Bus: Found keys
[ 4840.515] (II) evdev: Video Bus: Configuring as keyboard
[ 4840.515] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input11/event10”
[ 4840.515] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD, id 8)
[ 4840.515] () Option “xkb_rules” “evdev”
[ 4840.515] () Option “xkb_model” “pc105”
[ 4840.515] () Option “xkb_layout” “cn”
[ 4840.515] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 4840.515] (II) No input driver specified, ignoring this device.
[ 4840.515] (II) This device may have been added with another device file.
[ 4840.516] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 4840.516] () Sleep Button: Applying InputClass “evdev keyboard catchall”
[ 4840.516] (II) Using input driver ‘evdev’ for ‘Sleep Button’
[ 4840.516] () Sleep Button: always reports core events
[ 4840.516] () evdev: Sleep Button: Device: “/dev/input/event1”
[ 4840.516] (–) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4840.516] (–) evdev: Sleep Button: Found keys
[ 4840.516] (II) evdev: Sleep Button: Configuring as keyboard
[ 4840.516] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1”
[ 4840.516] (II) XINPUT: Adding extended input device “Sleep Button” (type: KEYBOARD, id 9)
[ 4840.516] () Option “xkb_rules” “evdev”
[ 4840.516] () Option “xkb_model” “pc105”
[ 4840.516] () Option “xkb_layout” “cn”
[ 4840.516] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 4840.516] (II) config/udev: Ignoring already known drm device (/dev/dri/card1)
[ 4840.516] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4840.516] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 4840.516] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[ 4840.516] (II) No input driver specified, ignoring this device.
[ 4840.516] (II) This device may have been added with another device file.
[ 4840.516] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 4840.516] (II) No input driver specified, ignoring this device.
[ 4840.516] (II) This device may have been added with another device file.
[ 4840.516] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
[ 4840.516] (II) No input driver specified, ignoring this device.
[ 4840.516] (II) This device may have been added with another device file.
[ 4840.517] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event5)
[ 4840.517] () A4Tech USB Mouse: Applying InputClass “evdev pointer catchall”
[ 4840.517] (II) Using input driver ‘evdev’ for ‘A4Tech USB Mouse’
[ 4840.517] () A4Tech USB Mouse: always reports core events
[ 4840.517] () evdev: A4Tech USB Mouse: Device: “/dev/input/event5”
[ 4840.517] (–) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xc10a
[ 4840.517] (–) evdev: A4Tech USB Mouse: Found 12 mouse buttons
[ 4840.517] (–) evdev: A4Tech USB Mouse: Found scroll wheel(s)
[ 4840.517] (–) evdev: A4Tech USB Mouse: Found relative axes
[ 4840.517] (–) evdev: A4Tech USB Mouse: Found x and y relative axes
[ 4840.517] (–) evdev: A4Tech USB Mouse: Found absolute axes
[ 4840.517] (II) evdev: A4Tech USB Mouse: Forcing absolute x/y axes to exist.
[ 4840.517] (II) evdev: A4Tech USB Mouse: Configuring as mouse
[ 4840.517] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
[ 4840.517] () evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[ 4840.517] () evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4840.517] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input7/event5”
[ 4840.517] (II) XINPUT: Adding extended input device “A4Tech USB Mouse” (type: MOUSE, id 10)
[ 4840.517] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
[ 4840.517] (WW) evdev: A4Tech USB Mouse: ignoring absolute axes.
[ 4840.517] () A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[ 4840.517] () A4Tech USB Mouse: (accel) acceleration profile 0
[ 4840.517] () A4Tech USB Mouse: (accel) acceleration factor: 2.000
[ 4840.517] () A4Tech USB Mouse: (accel) acceleration threshold: 4
[ 4840.517] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse1)
[ 4840.517] (II) No input driver specified, ignoring this device.
[ 4840.517] (II) This device may have been added with another device file.
[ 4840.517] (II) config/udev: Adding input device Integrated Camera (/dev/input/event7)
[ 4840.517] () Integrated Camera: Applying InputClass “evdev keyboard catchall”
[ 4840.517] (II) Using input driver ‘evdev’ for ‘Integrated Camera’
[ 4840.517] () Integrated Camera: always reports core events
[ 4840.517] () evdev: Integrated Camera: Device: “/dev/input/event7”
[ 4840.517] (–) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb39a
[ 4840.517] (–) evdev: Integrated Camera: Found keys
[ 4840.517] (II) evdev: Integrated Camera: Configuring as keyboard
[ 4840.517] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input9/event7”
[ 4840.517] (II) XINPUT: Adding extended input device “Integrated Camera” (type: KEYBOARD, id 11)
[ 4840.517] () Option “xkb_rules” “evdev”
[ 4840.517] () Option “xkb_model” “pc105”
[ 4840.517] () Option “xkb_layout” “cn”
[ 4840.517] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 4840.517] (II) No input driver specified, ignoring this device.
[ 4840.517] (II) This device may have been added with another device file.
[ 4840.518] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 4840.518] (II) No input driver specified, ignoring this device.
[ 4840.518] (II) This device may have been added with another device file.
[ 4840.518] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 4840.518] () AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
[ 4840.518] (II) Using input driver ‘evdev’ for ‘AT Translated Set 2 keyboard’
[ 4840.518] () AT Translated Set 2 keyboard: always reports core events
[ 4840.518] () evdev: AT Translated Set 2 keyboard: Device: “/dev/input/event3”
[ 4840.518] (–) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4840.518] (–) evdev: AT Translated Set 2 keyboard: Found keys
[ 4840.518] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4840.518] () Option “config_info” “udev:/sys/devices/platform/i8042/serio0/input/input3/event3”
[ 4840.518] (II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD, id 12)
[ 4840.518] () Option “xkb_rules” “evdev”
[ 4840.518] () Option “xkb_model” “pc105”
[ 4840.518] () Option “xkb_layout” “cn”
[ 4840.518] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 4840.518] () SynPS/2 Synaptics TouchPad: Applying InputClass “evdev touchpad catchall”
[ 4840.518] () SynPS/2 Synaptics TouchPad: Applying InputClass “touchpad catchall”
[ 4840.518] () SynPS/2 Synaptics TouchPad: Applying InputClass “Default clickpad buttons”
[ 4840.518] (II) LoadModule: “synaptics”
[ 4840.518] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4840.518] (II) Module synaptics: vendor=“X.Org Foundation”
[ 4840.518] compiled for 1.15.0, module version = 1.7.4
[ 4840.518] Module class: X.Org XInput Driver
[ 4840.518] ABI class: X.Org XInput driver, version 20.0
[ 4840.518] (II) Using input driver ‘synaptics’ for ‘SynPS/2 Synaptics TouchPad’
[ 4840.518] () SynPS/2 Synaptics TouchPad: always reports core events
[ 4840.518] () Option “Device” “/dev/input/event4”
[ 4840.536] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 4840.536] (–) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1024 - 5112 (res 0)
[ 4840.536] (–) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 2024 - 4832 (res 0)
[ 4840.536] (–) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4840.536] (–) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 4840.536] (–) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 4840.536] (–) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 4840.536] () Option “SoftButtonAreas” “50% 0 82% 0 0 0 0 0”
[ 4840.536] (–) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4840.536] () SynPS/2 Synaptics TouchPad: always reports core events
[ 4840.548] () Option “config_info” “udev:/sys/devices/platform/i8042/serio1/input/input5/event4”
[ 4840.548] (II) XINPUT: Adding extended input device “SynPS/2 Synaptics TouchPad” (type: TOUCHPAD, id 13)
[ 4840.548] () synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 4840.548] () synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 4840.548] () synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 4840.548] () SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 4840.548] () SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 4840.548] () SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 4840.548] () SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 4840.549] (–) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4840.549] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 4840.549] () SynPS/2 Synaptics TouchPad: Ignoring device from InputClass “touchpad ignore duplicates”
[ 4840.550] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
[ 4840.550] () TPPS/2 IBM TrackPoint: Applying InputClass “evdev pointer catchall”
[ 4840.550] () TPPS/2 IBM TrackPoint: Applying InputClass “trackpoint catchall”
[ 4840.550] (II) Using input driver ‘evdev’ for ‘TPPS/2 IBM TrackPoint’
[ 4840.550] () TPPS/2 IBM TrackPoint: always reports core events
[ 4840.550] () evdev: TPPS/2 IBM TrackPoint: Device: “/dev/input/event8”
[ 4840.550] (–) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 4840.550] (–) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 4840.550] (–) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 4840.550] (–) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 4840.550] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 4840.550] () Option “Emulate3Buttons” “true”
[ 4840.550] () Option “EmulateWheel” “true”
[ 4840.550] () Option “EmulateWheelButton” “2”
[ 4840.550] () Option “YAxisMapping” “4 5”
[ 4840.550] () evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 4840.550] () Option “XAxisMapping” “6 7”
[ 4840.550] () evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 4840.550] () evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4840.550] () Option “config_info” “udev:/sys/devices/platform/i8042/serio1/serio2/input/input6/event8”
[ 4840.550] (II) XINPUT: Adding extended input device “TPPS/2 IBM TrackPoint” (type: MOUSE, id 14)
[ 4840.550] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 4840.551] () TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 4840.551] () TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 4840.551] () TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 4840.551] () TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 4840.551] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 4840.551] (II) No input driver specified, ignoring this device.
[ 4840.551] (II) This device may have been added with another device file.
[ 4840.554] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 4840.554] () ThinkPad Extra Buttons: Applying InputClass “evdev keyboard catchall”
[ 4840.554] (II) Using input driver ‘evdev’ for ‘ThinkPad Extra Buttons’
[ 4840.554] () ThinkPad Extra Buttons: always reports core events
[ 4840.554] () evdev: ThinkPad Extra Buttons: Device: “/dev/input/event6”
[ 4840.554] (–) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 4840.554] (–) evdev: ThinkPad Extra Buttons: Found keys
[ 4840.554] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 4840.554] () Option “config_info” “udev:/sys/devices/platform/thinkpad_acpi/input/input8/event6”
[ 4840.554] (II) XINPUT: Adding extended input device “ThinkPad Extra Buttons” (type: KEYBOARD, id 15)
[ 4840.554] () Option “xkb_rules” “evdev”
[ 4840.554] () Option “xkb_model” “pc105”
[ 4840.554] (**) Option “xkb_layout” “cn”
[ 4841.705] (II) XKB: reuse xkmfile /var/lib/xkb/server-196B0DDCF5DB28BABBE74857F932BB3225CFF747.xkm
[ 4844.490] (II) XKB: reuse xkmfile /var/lib/xkb/server-196B0DDCF5DB28BABBE74857F932BB3225CFF747.xkm
[ 4871.925] (II) evdev: ThinkPad Extra Buttons: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) evdev: AT Translated Set 2 keyboard: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) evdev: Integrated Camera: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) evdev: A4Tech USB Mouse: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) evdev: Sleep Button: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) evdev: Video Bus: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) evdev: Video Bus: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) evdev: Power Button: Close
[ 4871.925] (II) UnloadModule: “evdev”
[ 4871.925] (II) UnloadModule: “synaptics”
[ 4871.938] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 4871.940] (EE) Server terminated successfully (0). Closing log file.