Hello, I am having trouble that the Xaviers on DRIVE AGX fails to power on frequently. Hardware Platform:DRIVE AGX Xavier™ Developer Kit(S/N:E3550-B03-S1597) Software Version:DRIVE Software 9 I checked the 9 LEDs status that can be seen from the corner as described in the document(DRIVE AGX Deve…

Hi @atsutaka , According to below snippet from your attached aurix_command.log, does it mean after the problem occured you still can power on successfully with “poweron” command? Why did “Thermal Shutdown Triggered” happen at the end of the snippet? You physically switched off the power? shell> po…

Could you try if installing DRIVE Software 10.0 will help on this problem?

We just issued a “poweron” command only. we do not turn off mechanical switch. And aurix says “We’re going to power off the system due to Thermal Shutdown”. We want to know why it prints “Thermal Shutdown Triggered” and how to avoid it.

We still have to use “DRIVE Software 9”. Is it possible to update only the aurix firmware?

[image] isao_yamada: Is it possible to update only the aurix firmware? Please refer to the documentations for it. Thanks! DRIVE OS Linux

We have updated the firmware as follows. before Flashed FW version is 3.02.07.00 SW Version: DRIVE-V5.1.0-E3550-EB-Aurix-ForHyperion-3.02.07 after Flashed FW version is 3.02.07.00 SW Version: DRIVE-V5.1.0-E3550-EB-Aurix-With3LSS-3.02.07 But the problem is not resolved. What should we do ne…

I need your help to clarify some things: [image] atsutaka: I am having trouble that the Xaviers on DRIVE AGX fails to power on frequently. Did you mean it doesn’t always fail to boot? What’s the failure rate? Has it ever been working after you receiving the system? What happened in between …

Did you mean it doesn’t always fail to boot? What’s the failure rate? It occurs about once every three times. It seems to occur frequently at cold boot at the first time when KL30_VBAT connector connects to +12V. Has it ever been working after you receiving the system? yes. What happened …

Does the system have the booting issue from day 1 you receiving it? Is “showvoltages” command available in your aurix console? If yes, could you help to provide the status by running it? If no, please flash IFW firmware and then get the status. Thanks!

DRIVE AGX fail to power on frequently

Autonomous Vehicles DRIVE AGX Xavier DRIVE AGX Xavier General

Topic		Replies	Views
DRIVE AGX Xavier not booting up DRIVE AGX Xavier General drive-platform-bootup	26	917	June 18, 2024
Not able to boot and reflash Drive AGX Xavier DRIVE AGX Xavier General drive-platform-setup	15	1560	July 28, 2022
PowerOn sequence error: Drive fails to boot DRIVE AGX Xavier General drive-platform-bootup	22	2117	October 12, 2021
Error while booting DRIVE AGX Xavier General	8	1560	October 12, 2021
Xavier A on NVIDIA Drive Xavier not able to flash / not able to boot DRIVE AGX Xavier General drive-platform-problem	40	2704	October 12, 2021
Drive AGX Xavier does not start up DRIVE AGX Xavier General	11	1671	October 12, 2021
Xavier AGX doesn't boot anymore DRIVE AGX Xavier General drive-platform-setup	27	2366	October 12, 2021
PSM_ModMgr: MODMGR_ERROR DRIVE AGX Xavier General drive-platform-problem	8	1189	February 28, 2022
I can not flash Xavier on a Pegasus DRIVE AGX Xavier General drive-platform-setup	2	900	October 12, 2021
Losing access to (one or two) Xavier boards after rebooting DRIVE AGX Xavier General driveos-mcu	5	1050	October 12, 2021

DRIVE AGX fail to power on frequently

Related topics