Mapping of pin no, module pin name with Jetson AGX Orin Carrier Board Block Diagram

Autonomous Machines Jetson & Embedded Systems Jetson AGX Orin
1

How we can map the signal names mentioned in the below image of Jetson AGX Orin Carrier Board Block Diagram with the pin no and module pin name of SOM?

image
image822×771 153 KB

For example, for “UPHY lane 1” connected to USB type-C but UPHY number and lane number is not there(i.e UPHY0/1 etc… and lane number ). Initially I thought 1 in the “UPHY lane 1” is lane number but later when I checked for HUB, it was mentioned as “UPHY lane 20” and lane 20 is not there in any of the UPHYs.
Mainly I am checking for the pin no and module pin name used for HDMI and PCIe-NVMe-SSD in the Jetson AGX Orin development kit.

3

please refer to the design guide document instead of above block diagram.

5

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.