Further info: We identified the issue to be the same as J502JTAG short circuit damaged carrier board . The U504 being burnt. Inductance had the brown/burnt substance only on the surface, probably coming from the other chip when it burnt. The JTag seems fine, however since we are a 10-student team working on our system, it is not possible to be certain it wasn’t bent and fixed afterward. Thanks for the help with the inductor. Would buying a new carrier board be a better option than debugging this one, if so, does Nvidia have an official shop for it? Trying the solution to remove U504 and check if the system boot.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Power LED of AGX Xavier dev-kit does not glow to set the in recovery mode, and cannot detect USB-C. What is the problem? | 8 | 668 | October 18, 2021 | |
| My xavier suddenly died? | 8 | 1009 | October 20, 2022 | |
| No activity when powering Jetson AGX Xavier on | 6 | 21 | August 13, 2024 | |
| Jetson Agx Xavier Developer kit doesn’t power on | 12 | 1732 | November 20, 2022 | |
| Cannot enter recovery mode after flash failure | 24 | 2388 | May 8, 2022 | |
| Xavier AGX Bricked ? Jetson cannot be flashed | 8 | 570 | November 9, 2022 | |
| Jetson Xavier Dev Kit won't boot | 6 | 387 | October 27, 2021 | |
| Jetson Xavier AGX Dev Kit (32GB) won’t power on correctly: power led turns on and then immediately off | 13 | 115 | November 22, 2024 | |
| Xavier not booting | 6 | 1992 | December 3, 2019 | |
| My Xavier AGX cannot power on | 12 | 490 | August 8, 2022 |