TX2 8GB flashing issue

Hi,
I am currently facing an issue while flashing a custom Jetpack image into the Jetson Tx2 Soc. When i am running the flash.sh script after putting the TX2 in recovery mode, The script gets halted in the command

12:50:23 INFO: Flash Jetson TX2 - flash: [ 11.1350 ] tegrarcm_v2 --boot recovery

12:50:23 INFO: Flash Jetson TX2 - flash: [ 11.1365 ] Applet version 01.00.0000

and then it gets timed out .
I tried flashing the base Jetpack Image using the Nvidia SDK manager also, but the issue remains the same.
I have attached the log file also for more info.
TX2 flashing_issue.log (13.7 KB)

Which jetpack version are you using?

Hi santosh.k,

Any update? Still an issue to support?

Hi Kayccc,
issue not resolved yet, it’s under process. Please check the link below for more detail.
https://forums.developer.nvidia.com/t/tx2-flashing-get-stuck-in-tegrarcm-v2-boot-recovery/181065/13

Best Regards,
Santosh

Please just use one topic to track same issue.

Set duplicated with Tx2 Flashing get stuck in tegrarcm_v2 --boot recovery - Jetson & Embedded Systems / Jetson TX2 - NVIDIA Developer Forums

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.