Using SD Card of one Xavier to another xavier

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX
1

Hi,
I am flashing jetpack sdk in sd card and used it for booting Jetson Xavier NX Dev kit.It booted and running successfully.

I am having another one Xavier NX Dev kit . I used the same sd card that contains jetpack sdk for new xavier dev kit . But it is not booting up.

Can you please let me know why it is happened and any solution to use same sdcard in both boards

3

Hi,

Please dump the serial console log from that problematic NX.

https://elinux.org/Jetson/General_debug

And if you don’t want to dump the log, you can also try to flash your sdcard on that new NX board too. That might make it work. Flashing the board maybe the fastest way to resolve this.