DRIVE OS Linux 5.2.0
DRIVE OS Linux 5.2.0 and DriveWorks 3.5
NVIDIA DRIVE™ Software 10.0 (Linux)
NVIDIA DRIVE™ Software 9.0 (Linux)
other DRIVE OS version
Target Operating System
NVIDIA DRIVE™ AGX Xavier DevKit (E3550)
NVIDIA DRIVE™ AGX Pegasus DevKit (E3550)
SDK Manager Version
Host Machine Version
native Ubuntu 18.04
I have a new Drive Pegasus which I flashed using the SDK manager following the video tutorial. At the end of the process I was suppose to see something on the screen attached to the Pegasus, but there’s no signal, I’m not even sure if the hardware was rebooted after the flashing (I waited for 2 hours).
When I type <<sudo minicom -D /dev/ttyUSB2 -C TegraA.txt>> the text file is empty (same with aurix and TegraB).
I’ve also tried <<sudo minicom -D /dev/ttyUSB2>> without success.
Am I missing something?
Logs (133.0 KB)