USB on carrier board not working

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

Hello,

we are using Orbitty carrier boards for the TX2.

Which steps are need to use the usb port using Jetpack 4.2?

I only found the board support package for L4T 28.2. (http://connecttech.com/support/resource-center/nvidia-jetson-tx2-tx1-product-support/). I tried to use that one but after flashing the TX2 did not boot at all.

Thank you very much!

2

Hi jonny21,

You will need their board support package for L4T 32.1 if you want to align with JetPack 4.2.
For their board support package for L4T 28.2, then only could support up to JetPack3.3.

You could calling or e-mailing ConnectTech Support directly, and they will get you up & running with your Orbitty.

Thanks

3

L4T 32.1 BSP was recently released for Orbitty: http://connecttech.com/resource-center/l4t-board-support-packages/#top .